Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  2. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  3. IM Modeling/Simulation Tool for KEI Dynamic/Thermal Loads Associated with Stage Separation

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: MDA06041

    Intense dynamic and thermal loads will occur during stage-separation events that are of major concern from both operational and safety viewpoints. The insensitive-munitions (IM) stimuli and thermal/dynamic response associated with such events has received very little attention, yet this is of major concern for the KEI vehicle undergoing Stage 1 to Stage 2 separation. The KEI event is at lower alti ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  4. Optimal Sensor Scheduling for Ballistic Missile Defense

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: MDA06009

    Our Phase I research involved the development of an innovative sensor scheduling algorithm in support of Ballistic Missile Defense. This algorithm schedules multiple diverse and distributed sensors to perform time-critical tasks relating to multiple moving targets; specifically, to detect, classify, localize, track, support the interception of, and conduct BDA for ballistic missiles throughout t ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  5. Safe High Power (High Rate) Lithium Battery for MKV (Missiles) with Long storage Life

    SBC: LithChem Energy / Div. of TOXCO, inc.            Topic: MDA06026

    r

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  6. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  7. High Performance 2:17 Permanent Magnets for Traveling Wave Tubes

    SBC: Electron Energy Corporation            Topic: N/A

    The objective of this effort is to develop high performance rare earth permanent magnets with essentially constant magnet properties over a wide temperature range of -50 to 350oC, and which can survive temperatures as high as 500oC, for TWT applications.The combination of a light rare earth (Sm) with heavy rare earths (Gd, Er, and Ho) provides very low temperature coefficients of magnetic properti ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  8. LOW COST MODULE DEVELOPMENT (kTC k016)

    SBC: k Technology Corporation            Topic: N/A

    kTC's high performance thermal core technology offers the potential of significant cost savings by allowing the use of low cost commercial components without the need for liquid flow through thermal cores. kTC's encapsulated APG thermal core is a highconductivity (>1000WmL) macrocomposite comprised of annealed pyrolytic graphite (AG) encapsulated within an aluminum sheet. In Phase I, k Technolog ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  9. Graphite Foam Core Heat Exchangers for Thermal Management

    SBC: Materials Resources International            Topic: N/A

    MRi proposes to further the demonstration of graphite foam heat exchanger fabrication technology utilizing its innovative active solder joining alloys and processes (S-Bond). The proposed Phase II will build on the success of the Phase I feasibilitystudies that showed the active solder joined Gr-foam core heat exchangers to have over 15 x the heat transfer capacity as aluminum finned heat exchang ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  10. Novel Heterodimensional Sensors

    SBC: PHOTONICS LABORATORIES, INC.            Topic: N/A

    The sensing element is the heart of a sensor. A generic requirement for any sensor is that it only responds to the particular stimulus since all other stimuli are considered noise. The basic physics of the operation of a sensor thus determines the limitof its sensitivity. Here we build upon a family of proposed light sensors in which sensor noise is substantially reduced by altering the nature ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government