You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cost Effective Processing Equipment for Large Composite Parts

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: N/A

    Reduced mass materials are critical to the success of aerospace systems. Thus, large air and space structures can benefit from lightweight composite materials. However, their adoption is impaired by the lack of a robust, cost-effective fabrication process, principally because the autoclaves used to consolidate composite laminates are so expensive for large parts. This program develops for US aeros ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  2. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  3. Wideband Tunable Fiber Laser

    SBC: QORTEK INC            Topic: N/A

    QorTek will develop an advanced hardware demonstration of a compact and functionally integrated tunable laser. The prototype will demonstrate a new dually opposed wideband extension-compression piezo-actuated approach to modulation that will enable larger wavelength excursion at sweep frequencies needed for emission or damage detection by NASA. The demonstration prototype will be VME board fiber m ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  4. Crashworthy Seat Cushion Replacement

    SBC: J B DWERLKOTTE ASSOCIATES INC            Topic: N/A

    Dynamically certified seats (16g seats) are being fielded in all jet transports certified since 1988. In addition, the airlines are steadily replacing their older seats with 16g compatible seats in the older aircraft certified prior to that date. The implementation of the dynamic seat requirements has encountered one unanticipated problem. Under normal use, seat cushions must be replaced with iden ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  5. High Performance Low Temperature Space Radiator (kTC P914)

    SBC: k Technology Corporation            Topic: N/A

    The observation missions for the New Millennium Program will utilize new materials and sensor technologies that will require cooling to temperatures in the 40K to 150K range. A space radiator with high conductivity at low temperatures that is lightweight and has high stiffness is required. The opportunity presented in this Phase I proposal is to demonstrate a space radiator that will have high con ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  6. High Performance Space Radiator Development (kTC P912)

    SBC: k Technology Corporation            Topic: N/A

    k Technology Corporation (kTC) proposes to develop a high performance satellite radiator material system that satisfies both structural and thermal management requirements. The proposed material system has a honeycomb core with carbon fiber composite encapsulated thermal pyrolytic graphite (TPG) face sheets. The encapsulated TPG face sheets have high conductivity (up to 1300 W/mK), low mass densit ...

    SBIR Phase II 2001 National Aeronautics and Space Administration
  7. Variable Conductance Heat Pipes for Radioisotope Stirling Systems

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: S203

    The overall technical objective of the proposed Phase II program is to complete a system-level demonstration to show the capability and benefits of integrating this backup radiator/Variable Conductance Heat Pipe (VCHP) with the Advanced Stirling Radioisotope Generator (ASRG). The Phase I project developed a feasible VCHP radiator design that can be integrated with the ASRG. In Phase II, a trade ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  8. Vapor Compressor Driven Hybrid Two-Phase Loop

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: X1101

    The Phase I project successfully demonstrated the feasibility of the vapor compression hybrid two-phase loop (VCHTPL). The test results showed the high temperature-lift capability and robust operation under transient heat loads of the VCHTPL. At the end of Phase I, the VCHTPL technology reached the NASA's defined Technology Readiness Level (TRL) 4 (Component/breadboard validation in a laboratory e ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  9. Pressure Controlled Heat Pipe for Precise Temperature Control

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: S706

    The principal Phase II objective is to refine and further develop the prototype PCHP into a useful thermal management tool. The Phase I program established the feasibility of thermal control an axially-grooved heat pipe with a variable-volume reservoir. The follow-on Phase II program will address control system optimization, component longevity, reductions in mass and power, and show that the de ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  10. Cryogenic Stepping Piezomotor for Large Torque, Precise Rotary and Linear Motion Control in Passive Optics

    SBC: TRS CERAMICS, INC.            Topic: S601

    TRS Technologies, Virginia Tech., and MTech, Inc. propose to develop high torque (>1.5 kg-cm), lightweight (< 250 g), low power (< 2 watts), high precision (

    SBIR Phase II 2008 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government