Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  2. Addressing the Driving Needs of Short Stature Persons

    SBC: SAFE INC            Topic: 04NH1

    Phase I research on the development of a supplemental seating system for short stature drivers was undertaken by Safe Inc. in 2005. The purpose of Phase I was to demonstrate the feasibility of a device that would improve the ability of short stature drivers to safely operate a motor vehicle and to improve occupant crash safety. The study sought to examine the use of pedal extenders and other imp ...

    SBIR Phase II 2008 Department of Transportation
  3. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  4. High-Power 2 Micron Fiber Lasers

    SBC: ADVALUE TECHNOLOGY LLC            Topic: AF071137

    Thulium doped fiber laser near 2 micron is of great interest because of the potential possibility of combining high efficiency, high output power, and retina safety together. This proposal is for the development of new Tm-doped glass fiber for efficient high power 2ƒnmicron fiber laser capable of generating an output power of up to thousands watts. The doping concentration of the proposed glass f ...

    SBIR Phase II 2008 Department of DefenseAir Force
  5. Fast Response Fabric Test Setup and Dynamic Fabric Model for BURNSIM

    SBC: Advanced Cooling Technologies, Inc.            Topic: AF071025

    Advanced Cooling Technologies, Inc. (ACT) will develop a Fast Thermal Response Fabric Test Setup for various thermal hazard scenarios involving convection (hot gas impingement by the jet engine exhaust), radiation (fire) and combination of convection and radiation (post-crash fire of aircraft, fire flash or bomb blast). The fabric test setup will (i) measure the thermal response of various clothin ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. Advanced NDE for SiC Optics Using Micromachined High Frequency Phased Array Ultrasound

    SBC: TRS CERAMICS, INC.            Topic: AF071142

    TRS is pleased to propose an in-situ NDE imaging tool for SiC mirror surface damage (SD), sub-surface damage (SSD) and trapped internal stress detection using piezo-composite based micromachined ultrasound transducer (PCMUT) phased array technology. PCMUT technology has been developed at TRS to fabricate high frequency ultrasound transducers with broad bandwidth and high sensitivity. Phased array ...

    SBIR Phase II 2008 Department of DefenseAir Force
  7. Improving Weapons Bay Acoustical Environments

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: AF071256

    The F-22A main weapons bay experiences severe acoustic loading when exposed to the freestream. The severity and attenuation of this loading is exacerbated by the flight envelope of the F-22A aircraft, as well as the requirement to carry and release “smart” weapons throughout this envelope. This extremely harsh environment can also impact components that are mounted within the bay itself, inclu ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. Turbopump Cavitation Tools

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: AF071204

    Next generation liquid rocket systems envision novel designs for turbopumps that can operate at high suction speeds (i.e. low inlet pressures), and can be throttled over a wide range of low, off-design flow conditions. This is an extremely demanding flow regime where performance loss and damage from cavitation instabilities can be catastrophic since they can generate large amplitude pressure fluc ...

    SBIR Phase II 2008 Department of DefenseAir Force
  9. General Hypersonic Propulsion

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: AF071185

    Upgrades to a RANS Scalar fluctuation model (SFM) used to predict variations in turbulent Prandtl and Schmidt numbers in a scramjet combustor environment are proposed. Such upgrades will permit obtaining more accurate solutions leading to improved combustor designs. Experiments to be performed in Virginia Tech (and AFRL) facilities using existing models will be performed focused on SFM validation ...

    SBIR Phase II 2008 Department of DefenseAir Force
  10. Improved inspection of Bonded Repairs

    SBC: Fbs, Inc.            Topic: AF071325

    Bonded joints are used extensively for both civilian and military aircraft applications, especially for corrosion damage mitigation via patch bonding. Assessing the quality of these bonds is typically performed using NDE techniques such as bulk wave ultrasonics or thermography. These methods cannot reliably differentiate between a good bond and a so-called "kissing" bond. A kissing bond has no mec ...

    SBIR Phase II 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government