You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Automated parking-cruising detection and measurement using Bluetooth AVI Sensor network

    SBC: RAPID FLOW TECHNOLOGIES            Topic: 142FH2

    Searching for street parking, a behavior known as cruising for parking, leads to excess congestion and pollution. Many recent smart parking interventions have attempted to address this issue, but the problem of effectively detecting and measuring cruising remains largely unsolved. The goal of this work is to develop methods to detect and measure cruising for parking and its effects on congestion u ...

    SBIR Phase II 2017 Department of Transportation
  2. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: PIASECKI AIRCRAFT CORP            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    This proposal leverages our current DOT-funded SBIR Phase II project developing software to assist truck drivers and companies to fatigue optimize driver scheduling and route planning. This project will build a set of web-services specially designed to provide objective quantitative feedback to truck drivers, dispatchers, and safety managers about fatigue from fatigue stressors common in trucking ...

    SBIR Phase II 2015 Department of Transportation
  4. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    Welding of HPS70W is well understood when using submerged arc welding (SAW) and shielded metal arc welding (SMAW) techniques. A Welding Advisory Group (WAG) which consisted of technical advisors from the Navy, AISI, and FHWA, major filler metal manufacturers, and steel producers determined the guidelines for welding HPS70W. As a result, comprehensive guidelines and welding procedures exist for SAW ...

    SBIR Phase II 2015 Department of Transportation
  5. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  6. Addressing the Driving Needs of Short Stature Persons

    SBC: SAFE INC            Topic: 04NH1

    Phase I research on the development of a supplemental seating system for short stature drivers was undertaken by Safe Inc. in 2005. The purpose of Phase I was to demonstrate the feasibility of a device that would improve the ability of short stature drivers to safely operate a motor vehicle and to improve occupant crash safety. The study sought to examine the use of pedal extenders and other imp ...

    SBIR Phase II 2008 Department of Transportation
  7. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  8. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  9. Development of Light-Weight, Low-Cost Multichannels Membrane Reformer

    SBC: ATS-MER, LLC            Topic: N/A

    A novel approach for the development of a lightweight, low-cost, compact, and quick start-up on-board fuel reformer is proposed in this Phase II program. The approach is based on a novel MER¿s technique for the fabrication of multichannel mini-reactors incorporating hydrogen separating membrane. Multichannel mini-reactor shrinks the dimensions through which energy and reactants travel to their ...

    SBIR Phase II 2001 Department of Transportation
US Flag An Official Website of the United States Government