Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. PDA-Based Portable Data Collection System for Commercial Vehicle Inspection

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 02FM1

    More than 1,300,000 Level 1 commercial vehicle inspections - a safety-critical, time-consuming, often difficult and painstaking process, especially as regards the brake inspection component -- are performed every year in the United States, under all sorts of weather and lighting conditions. The current technology used adds to the complexity and error potential inherent in this important task. In ...

    SBIR Phase II 2008 Department of Transportation
  2. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  3. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  4. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  5. AN INTERACTIVE, NATIONWIDE GEOGRAPHICAL INFORMATION SYSTEM TO ADMINISTER HIGHWAY ROUTE DESIGNATIONS FOR THE TRANSPORTATION OF HAZARDOUS MATERIALS

    SBC: Aegis Information Systems            Topic: N/A

    IN ACCORDANCE WITH THE HAZARDOUS MATERIALS TRANSPORTATION UNIFORM SAFETY ACT OF 1990 (HMTUSA), DOT IS NOW REQUIRED TO CREATE A CENTRALIZED DATABASE OF STATE-DESIGNATED HAZARDOUS MATERIAL HIGHWAY ROUTES. DOT IS ALSO RESPONSIBLE FOR PERIODICALLY UPDATING AND PUBLISHING A LIST OF CURRENLY EFFECTIVE HAZARDOUS MATERIALS HIGHWAY ROUTE DESINGATIONS IN THE FEDERAL REGISTER. IN RESPONSE TO THIS NEED, AEGIS ...

    SBIR Phase II 1995 Department of Transportation
  6. TRAFFIC

    SBC: Kld Associates Inc.            Topic: N/A

    THE TRAFFIC ENGINEER RELIES UPON A COLLECTION OF SOFTWARE TOOLS TO COMPUTE TRAFFIC SIGNAL TIMING PLANS AND TO EVALUATE THE OPERATIONAL PERFORMANCE OF HIGHWAY NETWORKS. TRANSPORTATION PLANNERS EMPLOY DEMAND MODELING TOOLS TO PROJECT TRAFFIC DEMAND, DISTRIBUTION, ASSIGNMENT AND PERFORMANCE OVER LARGE NETWORKS. THESE TOOLS HAVE TWO OVERALL ATTRIBUTES IN COMMON. THE ARE: 1) NETWORK-BASED AND 2) DATA I ...

    SBIR Phase II 1995 Department of Transportation
  7. CARBON FIBER SENSOR FOR AXLE DETECTION ON ROADWAYS

    SBC: Sensor Plus, Inc.            Topic: N/A

    A FORCE/STRAIN SENSOR CONSISTING OF CARBON FIBERS EMBEDDED IN ASPHALT, CONCRETE AND OTHER CONSTRUCTION MATERIALS WILL BE USED AS A PERMANENT VEHICLE AXLE AND TRAFFIC SENSOR ON ROADWAYS. FOR TEMPORARY INSTALLATION, A PAINT OR ASPHALT STRIP WITH CARBON FIBERS IS APPLIED TO THE ROADWAY IN THE FORM OF STRIPS. THIS WILL BE DEVELOPED DURING PHASE I. A SIGNAL CONDITIONER/PROCESSOR PROVIDES AXLE WEIGHT AN ...

    SBIR Phase II 1995 Department of Transportation
US Flag An Official Website of the United States Government