You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. PDA-Based Portable Data Collection System for Commercial Vehicle Inspection

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 02FM1

    More than 1,300,000 Level 1 commercial vehicle inspections - a safety-critical, time-consuming, often difficult and painstaking process, especially as regards the brake inspection component -- are performed every year in the United States, under all sorts of weather and lighting conditions. The current technology used adds to the complexity and error potential inherent in this important task. In ...

    SBIR Phase II 2008 Department of Transportation
  2. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  3. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  4. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
  5. "Advanced Application of EMATs in Rail Inspection"

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: N/A

    N/A

    SBIR Phase II 1997 Department of Transportation
  6. Instrumented Anchor Pin for Heavy Truck Brake

    SBC: Stratcom International Llc            Topic: N/A

    The bonded resistance strain gage has made possible a varety of force sensing transducers, commonly known as "load cells." Widely used types of load cells include the column, the bending beam, the ring, the circular plat and the shear web. To instrument the anchor pins used in heavy truck air braking systems, STRAINSERT will utilize proven research and evaluation techniques implemented during th ...

    SBIR Phase II 1997 Department of Transportation
  7. Innovative Energy Absorbing Composite Utility Poles

    SBC: United Dynamics, Inc.            Topic: N/A

    Utility poles present a serious roadside hazard due to the large number of poles located in close proximity to the roadways and the unforgiving nature of existing pole designs. Breakaway wooden utility poles have been developed over the past twenty years in an effort to improve utility pole safety, but these designs have not gained widespread acceptance. In order to realize safer utility poles w ...

    SBIR Phase II 1997 Department of Transportation
  8. ADVANCED MATERIAL CONCEPTS FOR GUARDRAIL END TREATMENTS

    SBC: United Dynamics, Inc.            Topic: N/A

    GUARDRAIL TERMINALS ARE SOME OF THE MORE TROUBLESOME AND POTENTIALLY HAZARDOUS ROADSIDE APPURTENANCES. RECENTLY DEVELOPED TERMINAL CONCEPTS WHICH HAVE PASSED CURRENT CRASH TEST CRITERIA TEND TO BE EXPENSIVE AND MAY REQUIRE EXCESSIVE LENGTH OF NEED, FLARE-OUT SPACE AND ADDITIONAL FILL AND GRADING. THIS PHASE I SBIR PROPOSAL ADDRESSES THE DEVELOPMENT OF A MORE EFFICIENT ENERGY ABSORBING TERMINAL CON ...

    SBIR Phase II 1994 Department of Transportation
  9. VIDEO COMPRESSION FOR TRANSMISSION OF ATC DISPLAYS TO REMOTETOWER CAB

    SBC: DELTA INFORMATION SYSTEMS INC            Topic: N/A

    THIS DOCUMENT IS AN SBIR TECHNICAL PROPOSAL SUBMITTED TO THEFEDERAL AVIATION ADMINISTRATION BY DELTA INFORMATION SYSTEMS, INC. IN RESPONSE TO SBIR SOLICITATION NUMBER 91-FA11. THE PURPOSE OF THE PROPOSED PROGRAM IS TO INVESTIGATE, ANALYZE, AND DESIGN ALTERNATIVE DATA COMPRESSION SYSTEMS TO EFFICIENTLY TRANSMIT AIR TRAFFIC CONTROL DISPLAY DATA FROM MAJOR AIRPORTS TO SMALLER SATELLITE AIRPORTS ON LI ...

    SBIR Phase II 1992 Department of Transportation
  10. FACIAL LACERATION MEASUREMENT MASK FOR ANTHROPOMORPHIC MODELS

    SBC: Triangle Research and Development Corporation            Topic: N/A

    ]THE PURPOSE OF THIS PHASE I EFFORT WILL BE TO DEVELOP AND TEST IN PROTOTYPE AN INNOVATIVE FACE MASK TO FIT THE HYBRID III MANIKIN HEADS. THE MASK WILL BE DESIGNED SPECIFICALLY TO BE SUITABLE FOR MEASURING FACIAL LACERATION POTENTIAL DURING VARIOUS TRAUMA RESEARCH EFFORTS. THIS MASK WILL BE CONSTRUCTED OF COMPOSITES THAT MIMIC MANY CHARACTERISTICS OFLIVING HUMAN SKIN AND WILL CAUSE MINIMAL DYNAMIC ...

    SBIR Phase II 1992 Department of Transportation
US Flag An Official Website of the United States Government