Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Microscopic Traffic Flow Simulation Models- An Open Source Approach

    SBC: New Global Systems for Intelligent Transportation Management            Topic: 081FH5

    PHASE II TECHNICAL OBJECTIVE The major objective of this Phase II proposal is to establish open source traffic simulation model and software, and to develop application programming interfaces to accommodate future traffic research needs. Objectives will be accomplished by building and demonstrating FOMM, an open source traffic simulation model and software. Furthermore, to accommodate future resea ...

    SBIR Phase II 2011 Department of Transportation
  2. Subgrid Scale Combustion Modeling Based on Stochastic Model Parameterization


    ABSTRACT: The technical objective of this program is to develop a fast running, subgrid scale turbulence-chemistry interaction model for large-eddy simulation (LES) of aircraft combustors and augmentors that can accurately capture critical phenomena such as extinction and re-ignition effects. To accurately capture these phenomena, this model is based upon a parameterization of the linear-eddy mo ...

    SBIR Phase II 2011 Department of DefenseAir Force
  3. FADEC Thermal Management

    SBC: Advanced Cooling Technologies, Inc.            Topic: AF093175

    ABSTRACT: The Full Authority Digital Engine Control (FADEC) controls engine operation. This SBIR Phase II project will develop a thermal management system for the FADEC that includes four components: 1. Active cooling to reject the FADEC waste heat to higher temperature heat sinks, 2. Heat pipes and other devices to reduce the temperature gradients inside the FADEC box, 3. Insulation to reduce t ...

    SBIR Phase II 2011 Department of DefenseAir Force

    SBC: Wavefront Research, Inc.            Topic: AF093003

    The goal of this Phase-II SBIR effort is to refine, optimize, and demonstrate novel module-to-module, card-to-card, card-to-box, and related optical distribution technologies for extreme environment aerospace applications. These technologies support both single mode and multi mode fibers and waveguides, are compact with small footprints, lightweight, support hundreds of channels, and are optimize ...

    SBIR Phase II 2011 Department of DefenseAir Force
  5. High Speed Store Separation Data Acquisition Techniques


    The proposed effort will conduct the development of the HSSS-DAT (High Speed Store Separation Data Acquisition Technique) System for simultaneously measuring store trajectories and instantaneous flow state during store dispense at high-speeds from weapons bays. CRAFT Tech & NCPA will complete the development and deployment of two different techniques for this purpose at the NCPA Tri-Sonic Wind Tun ...

    SBIR Phase II 2011 Department of DefenseAir Force
  6. Automated Analysis of RF Effects Data

    SBC: NOKOMIS, INC            Topic: AF093013

    ABSTRACT: Emerging Directed Energy weapon systems are particularly attractive to Combat Commanders due to their graduated effects, light-speed propagation, minimum collateral damage and deep magazines relative to kinetic weaponry. There are multiple efforts within the military which aim to demonstrate the efficacy of this technology. Yet, the infrastructure to support DEW strike packages is onl ...

    SBIR Phase II 2011 Department of DefenseAir Force
  7. Two-Material Penetrator Nose for Penetrating Sand and Concrete

    SBC: DE Technologies, Inc.            Topic: AF093096

    ABSTRACT: We propose to develop a two-part nose for a high-speed penetrator to successfully defeat hardened, deeply buried targets. The outer nose has a special shape that ensures stability of the penetrator's trajectory while penetrating a deep earth or sand overburden, to insure that the penetrator reaches its intended target without veering. When the penetrator then encounters a hardened ...

    SBIR Phase II 2011 Department of DefenseAir Force
  8. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  9. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  10. Fast Response Fabric Test Setup and Dynamic Fabric Model for BURNSIM

    SBC: Advanced Cooling Technologies, Inc.            Topic: AF071025

    Advanced Cooling Technologies, Inc. (ACT) will develop a Fast Thermal Response Fabric Test Setup for various thermal hazard scenarios involving convection (hot gas impingement by the jet engine exhaust), radiation (fire) and combination of convection and radiation (post-crash fire of aircraft, fire flash or bomb blast). The fabric test setup will (i) measure the thermal response of various clothin ...

    SBIR Phase II 2008 Department of DefenseAir Force
US Flag An Official Website of the United States Government