Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Innovative High Temperature Heat Pipes for Spacecraft Nuclear Fission Systems

    SBC: Advanced Cooling Technologies, Inc.            Topic: X803

    NASA Glenn is examining small fission reactors for future space transportation and surface power applications. The reactors would have an 8 to 15 year design life and should be available for a 2020 launch to support future NASA science missions. Both 1 kWe thermoelectric and 3 kWe Stirling systems have been examined. Heat pipes are being examined to transfer the thermal energy from the reactor ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  2. Advanced Long-Range Video Capabilities Using Speckle Imaging Techniques

    SBC: EM PHOTONICS INC            Topic: A402

    Flight-testing is a crucial component in NASA's mission to research and develop new aeronautical concepts because it allows for verification of simulated and wind-tunnel experiments and exposes previously unforeseen design problems. Video is an invaluable tool for flight-testing, allowing the collection of a wealth of information such as craft position, speed, health, as well as tracking diff ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  3. ISS Additive Manufacturing Facility for On-Demand Fabrication in Space

    SBC: Made In Space, Inc.            Topic: O302

    Made in Space has completed a preliminary design review of the Additive Manufacturing Facility. During the first half of Phase 1, the design went through conceptual development, simulation testing, cost analysis, and comparison testing of which off-the-shelf parts can be used. The deliverables for Phase I include a written report detailing evidence of demonstrated technology (TRL 5) in the laborat ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  4. Development of Manufacturing Technology for the Practical Application of Specialized and Environmentally Sensitive Nutrients, Enzymes, Immune-Stimulating Compounds and Biologics to Aquafeeds

    SBC: Zeigler Bros, Inc.            Topic: 823F

    In an effort to support the development of a domestic marine aquaculture industry, Zeigler Bros. Inc., (ZBI) proposes to continue its Phase I research by demonstrating the ability to scale up inclusion particle (IP) manufacturing. During Phase II ZBI will also demonstrate the efficacy of IOs for orally delivering phytase and probiotics to marine finfish. These efforts will directly address the p ...

    SBIR Phase II 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Space Electronics Operating at High Temperatures and Radiation Levels

    SBC: Qortek, Inc.            Topic: S305

    The objective is to produce high efficiency DC/DC power modules in a small low profile package that can tolerate extreme environment conditions. The primary effort of the Phase II program is to address the need for very high performance power electronics that meet a combination of high radiation tolerance, high thermal tolerance and extremely low EMI susceptibility/radiation. The power modules in ...

    SBIR Phase II 2013 National Aeronautics and Space Administration
  6. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  7. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  8. Variable Conductance Heat Pipes for Radioisotope Stirling Systems

    SBC: Advanced Cooling Technologies, Inc.            Topic: S203

    The overall technical objective of the proposed Phase II program is to complete a system-level demonstration to show the capability and benefits of integrating this backup radiator/Variable Conductance Heat Pipe (VCHP) with the Advanced Stirling Radioisotope Generator (ASRG). The Phase I project developed a feasible VCHP radiator design that can be integrated with the ASRG. In Phase II, a trade ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  9. Vapor Compressor Driven Hybrid Two-Phase Loop

    SBC: Advanced Cooling Technologies, Inc.            Topic: X1101

    The Phase I project successfully demonstrated the feasibility of the vapor compression hybrid two-phase loop (VCHTPL). The test results showed the high temperature-lift capability and robust operation under transient heat loads of the VCHTPL. At the end of Phase I, the VCHTPL technology reached the NASA's defined Technology Readiness Level (TRL) 4 (Component/breadboard validation in a laboratory e ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
  10. Pressure Controlled Heat Pipe for Precise Temperature Control

    SBC: Advanced Cooling Technologies, Inc.            Topic: S706

    The principal Phase II objective is to refine and further develop the prototype PCHP into a useful thermal management tool. The Phase I program established the feasibility of thermal control an axially-grooved heat pipe with a variable-volume reservoir. The follow-on Phase II program will address control system optimization, component longevity, reductions in mass and power, and show that the de ...

    SBIR Phase II 2008 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government