Award Data

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Buoy vandalism occurs all over the world for many different reasons, and costs NOAA and other buoy operators an estimated $1 million annually to replace and repair them. To deter vandals and report any vandal attempts to NOAA, McQ has developed the Buoy Guard System (BGS). BGS is a small, extremely low power sensor system that will detect the presence of intruders first approaching and then boa ...

Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

NOAA can reduce costs and improve efficiency by remotely monitoring harbors, navigation channels and coastlines for bathymetric changes. This will aid NOAA and its mission to maintain waterways and assure maritime safety. This remote sensing can be accomplished by implementing a new radar derived bathymetry capability. Areté Associated proposes to implement an advanced algorithm to derive bath ...

The Ultra Portable Ride Quality Meter (UPRQM) is a cost-effective, flexible tool that can evolve (with minimal effort) as new GPS and accelerometer devices become commercially available. Each generation of these sensor devices is more responsive, more sensitive, and more accurate than the last generation. The time between generations is also decreasing such that accelerometer and GPS technology ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

N/A