Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    This proposal leverages our current DOT-funded SBIR Phase II project developing software to assist truck drivers and companies to fatigue optimize driver scheduling and route planning. This project will build a set of web-services specially designed to provide objective quantitative feedback to truck drivers, dispatchers, and safety managers about fatigue from fatigue stressors common in trucking ...

    SBIR Phase II 2015 Department of Transportation
  2. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    Welding of HPS70W is well understood when using submerged arc welding (SAW) and shielded metal arc welding (SMAW) techniques. A Welding Advisory Group (WAG) which consisted of technical advisors from the Navy, AISI, and FHWA, major filler metal manufacturers, and steel producers determined the guidelines for welding HPS70W. As a result, comprehensive guidelines and welding procedures exist for SAW ...

    SBIR Phase II 2015 Department of Transportation
  3. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: Piasecki Aircraft Corporation            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Identification and Resolution of Events

    SBC: INTUIDEX INC.            Topic: AF083055

    ABSTRACT:The Air Force has a need to maintain strong intelligence capability in semi-permissive and anti-access area denial (A2/AD) scenarios where full-motion video (FMV)-based surveillance assets are rare or unavailable. In such environments, priority is given to leveraging any and all other sources of intelligence available, which may include ?open sources? of data available on the public Web, ...

    SBIR Phase II 2015 Department of DefenseAir Force
  5. Manufacturing Process Maturation for Propulsion Technology: Structural Insulators

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: MDA08018

    ABSTRACT:The Arnold Engineering Development Complex (AEDC) represents the nations largest aerospace ground test facilities and includes several wind tunnels that are unlike any other in the world.AEDC routinely provides aerodynamic and aerothermodynamic ground testing to evaluate aerodynamic and propulsion system performance under hypersonic conditions.Its facilities are used to test the flight an ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Bearing Analytical Software Development and Validation

    SBC: Wedeven Associates, Inc.            Topic: AF131163

    ABSTRACT: This proposal describes an analytical approach to model rolling element bearings for gas turbines and similar drive systems. Detailed approaches for modeling bearing material fatigue life, bearing heat generation, and tribology are presented. The resulting analytical bearing code will enable gas turbine engineers and designers to better assess engine lubrication system thermal loads a ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. Advanced Detection of Electronic Counterfeits (ADEC) Air Force Sustainment Center (AFSC) Pilot

    SBC: NOKOMIS, INC            Topic: AF093013

    ABSTRACT:

    SBIR Phase II 2015 Department of DefenseAir Force
  8. High Accuracy, Turnkey Minimum Hot Surface Ignition Test Apparatus

    SBC: Advanced Cooling Technologies, Inc.            Topic: AF141222

    ABSTRACT: This Small Business Innovation Research (SBIR) Phase II project proposes to develop and demonstrate a test apparatus for determining the minimum hot surface ignition (HSI) temperature of flammable liquids in aircraft operating conditions. Flammable liquids leaking onto hot surfaces, such as those in an aircraft engine bay, present fire hazards and risks to personnel and equipment. To pro ...

    SBIR Phase II 2015 Department of DefenseAir Force
  9. POSS Nanochemical Technology for Radiation Hardened/Tolerant Systems

    SBC: HYBRID PLASTICS            Topic: MDA04036

    ABSTRACT:Specialty elastomers, such as hydrogenated acrylonitrile-butadiene rubber (HNBR) and fluoroelastomer (FKM), are widely utilized as high performance seals in numerous aerospace vehicles and components. The elastomer sealing industry and its products are primarily based on a limited pool of feedstocks that were last advanced in the 1970's. Using current technology, elastomeric seals must b ...

    SBIR Phase II 2015 Department of DefenseAir Force
  10. Advanced Detection of Electronic Counterfeits (ADEC) for FPGA Authentication and Integrity Verification

    SBC: NOKOMIS, INC            Topic: MDA12026

    ABSTRACT:Field Programmable Gate Arrays (FPGAs) and other complex microelectronic devices are critical to Air Force advanced electronic systems. As the sophistication of supply chain counterfeit infiltration continued to grow, criminal elements and adversarial states have expanded the use of advanced techniques that defeat conventional screening methodologies to exploit supply chain weaknesses fo ...

    SBIR Phase II 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government