Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Pipeline Integrity Assessment Using In-Line Inspection

    SBC: Jentek Sensors, Inc.            Topic: 132PH1

    This proposed Phase II effort will fabricate and test a working prototype ILI tool, including a pull-test on representative samples with representative defects under representative conditions. The focus is on oil pipelines, as well as gas pipelines. This program will address some pressing, high priority needs such as reliable characterization of longitudinal cracks (including cracks at ERW welds), ...

    SBIR Phase II 2015 Department of Transportation
  2. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    This proposal leverages our current DOT-funded SBIR Phase II project developing software to assist truck drivers and companies to fatigue optimize driver scheduling and route planning. This project will build a set of web-services specially designed to provide objective quantitative feedback to truck drivers, dispatchers, and safety managers about fatigue from fatigue stressors common in trucking ...

    SBIR Phase II 2015 Department of Transportation
  3. Hybrid Laser Arc Welding for Thick Plate High Performance Steels

    SBC: TECHKNOWSERV CORP            Topic: 132FH1

    Welding of HPS70W is well understood when using submerged arc welding (SAW) and shielded metal arc welding (SMAW) techniques. A Welding Advisory Group (WAG) which consisted of technical advisors from the Navy, AISI, and FHWA, major filler metal manufacturers, and steel producers determined the guidelines for welding HPS70W. As a result, comprehensive guidelines and welding procedures exist for SAW ...

    SBIR Phase II 2015 Department of Transportation
  4. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: Piasecki Aircraft Corporation            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Ultra-High Precision Laser Isotope Monitor for I3CO2, CO180 and CO170

    SBC: Aerodyne Research, Inc.            Topic: 831RC

    Greenhouse gas (GHG) emissions are primary drivers of global climate change. Hence there is a crucial need to quantify their sources and sinks. A powerful method to constrain source and sink strengths is the analysis of the relative proportions of isotopic variants of GHG’s in atmospheric samples like those collected globally by NOAA’s Cooperative Air Sampling Network. Measurements that are ca ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Multi-Purpose Above Surface/Below Surface Expendable Dropsondes (MASED)

    SBC: Boston Engineering Corporation            Topic: 842W

    There are currently no inexpensive, expendable air-deployed monitoring systems (Dropsondes) that measure atmospheric data and oceanographic as a function of depth. These are important data in predicting the intensity and path of hurricanes. Boston Engineering proposes to provide NOAA with a solution to this challenge with the Multi-Purpose Above Surface/Below Surface Expendable Dropsonde (MASED) p ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: 05FH1

    Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

    SBIR Phase II 2008 Department of Transportation
  8. Wireless Brake Shoe Force Measurement System

    SBC: Mide Technology Corporation            Topic: 04FR1

    Railroad freight car safety and maintenance cost is directly related to knowledge of the actual braking force provided by a brake shoe. If the brake force is too low, safety is at risk. If the brake shoe is replaced before the end of it's lifetime to ensure safety, maintenance and thus operating costs are increased. Currently there is no system in place to monitor brake shoe force during train ...

    SBIR Phase II 2008 Department of Transportation
  9. Low Cost Transverse Rail Defect Detector

    SBC: Mide Technology Corporation            Topic: 02FR1

    Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

    SBIR Phase II 2008 Department of Transportation
  10. Innovative Multi-cellular Pultruded Composite Guardrail

    SBC: Creative Pultrusions, Inc            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of Transportation
US Flag An Official Website of the United States Government