Award Data

With infrastructure costs escalating it is becoming essential to monitor the health of concrete structures so that timely maintenance can maximize their useful lives. This SBIR will demonstrate the feasibility of using a passive sensor, embedded within concrete, to measure mositure, temperature, pH and concentrations of chlorides. It will provide critical data for evaluating concrete performance s ...

An optical, non-contact roof deformation monitoring system will be designed based on an existing multi-point, non-contact, multi-axis optical sensor-based measurement system that is currently used to measure chest deflection in crash-test dummies. The research involves determining suitable components to be used in the optical path, from high-power LED arrays through lenses and optical sensors. T ...

Calspan Corporation, located in Buffalo, NY is proposing the research and development of the technology and methodolgy that can be used to accurately measure pedestrian exposure. Existing technologies/methodologies will be analyzed, and a technology/methodolgy that focuses on an individual pedestrian's walking history will be specified. Only technologies that are small, lightweight, reliable, an ...

More than 1,300,000 Level 1 commercial vehicle inspections - a safety-critical, time-consuming, often difficult and painstaking process, especially as regards the brake inspection component -- are performed every year in the United States, under all sorts of weather and lighting conditions. The current technology used adds to the complexity and error potential inherent in this important task. In ...

This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Detection, classification, and characterization are the key to enhancing motorcycle safety, operations and travel estimation. Motorcycle fatalities are currently estimated at 30 times those of auto fatalities per Vehicle Mile Traveled (VMT). Although it has been an active research area for many years, motorcycle detection and classification still remains as a challenging task. The goal of Phase I ...

In the Open-source microscopic traffic simulation models project, a component based software framework is proposed to re-engineer CORISM data struture and CORISM interface. Under the architecture combing the innovative framework and the legacy CORISM, prototype of the open source traffic flow simulation models will be developed and demonstrated in the Phase I. In addition, areas identified by th ...

This project addresses the specific need for an improved method for cleaning insulators that electrically isolate the third rail. Current methods are labor intensive and expensive, but the insulators should be cleaned regularly to avoid even greater expense. This project is to adapt an innovative photolytic paint stripper to cleaning insulators for the third rail. The overall objective is to de ...