You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Compact Laser Shearography System for Crack Detection
SBC: Laser Technology Inc. Topic: 05FH1Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...
SBIR Phase II 2008 Department of Transportation -
Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials
SBC: Integran Technologies U.S.A. Inc. Topic: 07PH1This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...
SBIR Phase I 2008 Department of Transportation -
Design, Development and Testing of Optimized Composite "Soft Crack Arrestors"
SBC: Engineering Mechanics Corporation of Columbus Topic: 07PH1Emc2's proposal provided to DOT in response to SBIR Research topic 07-PH1 on "Design Optimization for Soft Crack Arrestors" focuses on the development of key material property data needed to design "soft crack arrestors". This testing will be done over a range of temperatures to cover extreme conditions for future pipeline designs. It is also essential to develop this data at the loading rates t ...
SBIR Phase I 2008 Department of Transportation -
Development of Fiber Optic Approach Lighting Systems Part One: Development of LED Threshold Lights
SBC: Lighting Innovations, LLC Topic: N/AThe incandescent lamps used in the green threshold lamps that form a line on the front end of an airport runway, have relatively short lives and require constant maintenance. The green filters used in front of the lamps transmit only about 20% of the light. Green light emitting diodes (LEDs) have been improved recently and are reaching brightness levels making it possible to use them in traffic ...
SBIR Phase I 2001 Department of Transportation -
Development of Fiber Optic Approach Lighting Systems Part One: Development of LED Threshold Lights
SBC: Lighting Innovations, LLC Topic: N/AThe incandescent lamps used in the green threshold lamps that form a line on the front end of an airport runway, have relatively short lives and require constant maintenance. The green filters used in front of the lamps transmit only about 20% of the light. Green light emitting diodes (LEDs) have been improved recently and are reaching brightness levels making it possible to use them in traffic ...
SBIR Phase II 2001 Department of Transportation -
Development of Fiber Optic Approach Lighting Systems Part One: Development of LED Threshold Lights
SBC: Lighting Innovations, LLC Topic: N/AThe incandescent lamps used in the green threshold lamps that form a line on the front end of an airport runway, have relatively short lives and require constant maintenance. The green filters used in front of the lamps transmit only about 20% of the light. Green light emitting diodes (LEDs) have been improved recently and are reaching brightness levels making it possible to use them in traffic ...
SBIR Phase II 2001 Department of Transportation -
Development of Fiber Optic Approach Lighting Systems Part One: Development of LED Threshold Lights
SBC: Lighting Innovations, LLC Topic: N/AThe incandescent lamps used in the green threshold lamps that form a line on the front end of an airport runway, have relatively short lives and require constant maintenance. The green filters used in front of the lamps transmit only about 20% of the light. Green light emitting diodes (LEDs) have been improved recently and are reaching brightness levels making it possible to use them in traffic ...
SBIR Phase I 2001 Department of Transportation -
Evaluation of Composite Joints in General Aviation (GA) Structures (MSC P1S21-118)
SBC: MATERIALS SCIENCES LLC Topic: N/ASimple, yet accurate engineering analytical tools will be developed for the evaluation of strength, durability and damage tolerance of composite bonded joints used in General Aviation (GA) structures with due consideration to adherend and adhesive thickness variations used (or present) in such joints. These tools and other available ones will be exercised for typical joint GA joint configurations ...
SBIR Phase I 2001 Department of Transportation -
Innovative Energy Absorbing Composite Utility Poles
SBC: United Dynamics, Inc. Topic: N/AUtility poles present a serious roadside hazard due to the large number of poles located in close proximity to the roadways and the unforgiving nature of existing pole designs. Breakaway wooden utility poles have been developed over the past twenty years in an effort to improve utility pole safety, but these designs have not gained widespread acceptance. In order to realize safer utility poles w ...
SBIR Phase II 1997 Department of Transportation -
Innovative Multi-cellular Pultruded Composite Guardrail
SBC: Creative Pultrusions, Inc Topic: N/AN/A
SBIR Phase I 2001 Department of Transportation