You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Crystal Properties and Transducer Modeling for High Power Composite & Tonpilz Projector Design
SBC: TRS CERAMICS, INC. Topic: N08061TRS Technologies will build on the measurements performed in the Phase I program, which will allow for higher fidelity models and a more streamlined insertion of single crystal transducers into the Navy. Dynamic and bend testing of PMN-PT and modified A and B-site doped crystals will be made to better understand the tensile strength behavior of single crystal. Self-consistent temperature-dependent ...
SBIR Phase II 2009 Department of DefenseNavy -
Individualized Fatigue Management Program Technology for Trucking Operations
SBC: PULSAR INFORMATICS, INC. Topic: 091FM1Individual differences in vulnerability to sleep loss and fatigue from extended work hours and night work are a substantial problem in transportation work schedule development, fatigue risk management strategies, and prediction of performance impairment in real-world operations. This project will deliver an individualized Fatigue Management Program (FMP) technology for trucking operations that in ...
SBIR Phase I 2009 Department of Transportation -
Micromechanical Assessment of Thermochemically Induced NDE Changes in Advanced Composites
SBC: MATERIALS RESEARCH & DESIGN INC Topic: N07177The Joint Strike Fighter is considering the use of organic and ceramic matrix composites for high temperature engine components. Material coupons and flight tests have shown that when these materials are exposed to high temperatures in the presence of air, salt fog, and humidity they can react chemically. The chemical reactions may cause a significant loss in composite strength even though there i ...
SBIR Phase II 2009 Department of DefenseNavy -
Belt Shift Interlock Delay/Deaccelerator with Learning Curve Software to increase Seatbelt Usage on commercial Vehicles
SBC: The Tenik Group Inc. Topic: 07FM1Various methods for increasing seat belt usage have been investigated over the last several years including visual and audible warnings currently installed in today's vehicles. In spite of these attempts, FMCSA research has shown that drivers of about 59% of commercial motor vehicles (those weighing over 10,000 pounds or more that operate in interstate commerce) buckle their safety belts as compa ...
SBIR Phase I 2008 Department of Transportation -
Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials
SBC: Integran Technologies U.S.A. Inc. Topic: 07PH1This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...
SBIR Phase I 2008 Department of Transportation -
Compact Laser Shearography System for Crack Detection
SBC: Laser Technology Inc. Topic: 05FH1Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...
SBIR Phase II 2008 Department of Transportation -
Low Cost Transverse Rail Defect Detector
SBC: Mide Technology Corporation Topic: 02FR1Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...
SBIR Phase II 2008 Department of Transportation -
Innovative Low-cost, In-situ Consolidation Head for Complex Geometry Thermoplastic Fiber Placement
SBC: ACCUDYNE SYSTEMS, INC. Topic: N08135Accudyne proposes a SBIR program, endorsed by Sikorsky, Cytec Engineered Materials, and NASA-LaRC, to develop a cost-effective thermoplastic automated tow placement (ATP) process and demonstrate it by fabricating and testing a complex contoured skin (Phase 1) and a CH-53K rotorcraft lower cabin or ramp skin (Phase 2). The process employs in situ consolidation, avoiding the autoclave. The targete ...
SBIR Phase I 2008 Department of DefenseNavy -
Innovative Approaches to the Fabrication of Composite Rotary Wing Main Rotor Blade Spars
SBC: ACCUDYNE SYSTEMS, INC. Topic: N08026This proposal will supply to NAVAIR and to rotorcraft manufacturing companies the emerging solution to their fabrication needs as it relates to the production of Rotor Blade Spars. The process and machine concept developed in Phase I will provide NAVAIR and the rotocraft manufacturing companies an automated solution to spar manufacturing. This will enable: • Low part manufacturing cost • High ...
SBIR Phase I 2008 Department of DefenseNavy -
Tactical Power Analysis and Development for Distributed Operations Squad
SBC: ADAPTIVE MATERIALS, INC. Topic: N07160Adaptive Materials, Inc. (AMI) proposes to evaluate technologies and mission profiles for use in the development of an efficient power management system for the United States Marine Corps Distributed Operations Squads. The base Phase I effort will focus on optimizing existing AMI power management technology to analyze mission profiles and provide optimized power solutions for given combat load. T ...
SBIR Phase I 2008 Department of DefenseNavy