Award Data

Individual differences in vulnerability to sleep loss and fatigue from extended work hours and night work are a substantial problem in transportation work schedule development, fatigue risk management strategies, and prediction of performance impairment in real-world operations. This project will deliver an individualized Fatigue Management Program (FMP) technology for trucking operations that in ...

This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

The object of this proposal is to develop a new analytical method (lateral flow immunochromatographic device) for the rapid and on-site detection of pyridine carboxylic acid herbicides (aminopyralid, clopyralid, picloram and triclopyr) in compost and animal waste. The availability of a screening method to determine if compost is safe to be used in crops and ornamental flowers will greatly help pro ...

Currently, there is no standardized process for assessing the accessibility of recreation elements used for outdoor recreation, picnic and camping facilities although standards for specific outdoor recreation elements exist, the Forest Service Outdoor Recreation Accessibility Guidelines and the draft US Access Board Regulatory Negotiation Committee on Accessibility Guidelines for Outdoor Developed ...

Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

There continues to be need for production of fuel grade ethanol (FGE) from biomass. This has many advantages including: development of fuel independence; zero net greenhouse gas emissions; strengthen U.S. agricultural base; and excellent replacement for MTBE as oxygenate. CMS has identified novel membrane systems and novel processes for reducing the cost for drying fuel grade ethanol (FGE). Limite ...

Fugitive emissions of VOCs from gasoline marketing facilities are an energy, safety and environmental issue. All new vehicles made after the year 2000 must have an Onboard Refueling Vapor Recovery System (ORVR) which increase fugitive emissions of refueling stations because of interface between ORVR vehicles and gasoline station underground storage systems (UST). The increase of VOCs is attributed ...

Vegetable oil is commonly extracted from oil seeds using hexane. Separation of oil and solvent (hexane) from this extracted mixture (known as miscella) is usually carried out by solvent evaporation or distillation. Solvent recovery from miscella consumes about 50% of the total energy required for the edible oil production. Solvent evaporation is an energy intensive operation and explosive vapors i ...