Award Data

Individual differences in vulnerability to sleep loss and fatigue from extended work hours and night work are a substantial problem in transportation work schedule development, fatigue risk management strategies, and prediction of performance impairment in real-world operations. This project will deliver an individualized Fatigue Management Program (FMP) technology for trucking operations that in ...

Photon-X is proposing to develop a 3D roof imaging system to monitor vehicle roof deformation during vehicle rollover testing. The system will provide photographic resolution imagery with the ability to track the dot pattern on the vehicle roof. The Photon-X spatial phase 3D imaging system will provide an accurate visible record of roof deformation with position accuracy of 1mm and velocity accu ...

Photon-X is proposing to develop an innovative dynamic 3D roof imaging system to monitor vehicle roof deformation during vehicle rollover testing. The 3D imaging system will capture real-time dynamic motion of the roof and vehicle occupants for playback analysis or modeling to enhance overall safety in rollover crashes. The system will provide photographic resolution 3D imagery with the ability ...

This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

The objective of this work is to develop a low cost 6 DOF body tracking system to monitor the orientations of an occupants and pedestrians as well as vehicle kinematics in vehicular impact tests. This tracker system can be standalone or part of a subsystem that can communicate with other trackers and external computer via serial, USB and/or Bluetooth interface. The proposed tracker coined Body O ...

Laser Technology Inc. (LTI) proposes a Phase II SBIR research project to further develop a Compact Shearography System, Analysis Method and Software for micro-crack detection in concrete. There is an urgent need to detect and characterize fine cracks in concrete that form because of various damage mechanisms including alkali-silicate reaction, delayed ettringite formation or frost damage. Fine s ...

Development of the basic EMAT based transverse rail defect detector has progressed toward finished form, as envisioned in the original solicitation. This modification is intended to produce a demonstratable version of a 2-rail detection system with automated signal interpertation. The objectives of this work are to: a. Further develop the system into a functioning 2-rail detection system, as ori ...

N/A

Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

This proposal describes the application of a mature nanotechnology-based crack arrest/structural repair technology as a novel in-field pipeline repair tool. The repair would be comprised of a thin layer or sleeve of electrodeposited nancrystalline material applied to the damaged region of the pipe in order to utilize the "crack filling" characteristic of the process. The concept proposed has alr ...