You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Solid State Ceramics, Inc.            Topic: MDA16010

    Phase II will exit with a new and substantially test-rig validated new solid-state integrated propulsion control valve actuator design for Divert and Attitude Control Systems (DACS) that present a unique engineering challenge in that they need to fit in tight volumes, require very high performance and are subject to extreme temperatures that fills the void of providing a highly engineered but simp ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  2. Development of Lyocell-Based High Temperature Composites for Structural Insulator Applications

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: MDA16020

    Materials Research & Design, Inc. submits this Phase II SBIR proposal to address Rayon Replacement for High Temperature Materials. The proposed program seek to demonstrate repeatable processability of low conductivity, low modulus, high strength, Lyocell-Based materials that can provide sustained, domestic replacement for rayon based structural insulators. MR&D will manage the program and perform ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  3. Metallized Ceramic-Based Structural Insulators

    SBC: Plus Designs, Inc.            Topic: MDA16020

    An ideal structural insulator will not outgas, will not change significantly with respect to material properties and geometry during elevated temperature exposure, will have the necessary thermal conductivity/diffusivity for insulating purposes, and will have the necessary stiffness to provide proper support.Metallized ceramic-based structural insulators are anticipated to offer improved performan ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  4. Miniaturized Programmable Signal Generator for Beacon Applications

    SBC: NOKOMIS, INC            Topic: MDA16023

    Todays newer weapons systems are being designed with small platforms which may not have the space or power delivery systems necessary to support a full complement of electronics desired, such as electronic beacon systems.However, certain platform types, such as the missile defense system (MDS), have an inherent need to have these types of beacon system present to support mission requirements.A nee ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency
  5. NDT of Fracture Toughness for Pipeline Steels

    SBC: Fbs, Inc.            Topic: 180PH1

    NDT of Fracture Toughness for Pipeline Steels 3/16/2018 Ultrasound-based technology to nondestructively determine fracture toughness of pipeline steels will be developed. Fracture toughness is the material parameter that, along with applied loading and flaw geometry, dictates the critical crack size, and therefore controls the flaw size that must be detected during inspections. A major challeng ...

    SBIR Phase I 2018 Department of Transportation
  6. Doppler Wind Temperature Sounder

    SBC: Brandywine Photonics, LLC            Topic: 8212

    TECHNICAL ABSTRACT: We propose developing a new observational capability for measuring upper atmosphere (20-Km to 200-Km+ altitude) wind and temperature dynamics, based on Doppler imaging of Limb concentrations of NO, N2O, and CO2 called the Doppler Wind Temperature Sounder. The principle of operation is that by measuring the Doppler shift of trace gases created by the differential velocity betwee ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Advanced Optic Materials for Endo-Atmospheric Seeker Windows

    SBC: NOKOMIS, INC            Topic: MDA17005

    The MDA requires EO/IR window technology that can perform and endure under the high-temperatures and high-heating rates (thermal shock) experienced by endo-atmospheric seeker missiles.Nokomis proposes a phase-engineered spinel-based window solution that utilizes proven techniques for achieving extreme thermal shock resistance.Nokomis will produce a EO/IR transparent ceramic material that is able t ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  8. Hyper-Velocity Projectile (HVP) Warhead Optimization for Lethality

    SBC: GENERAL SCIENCES INC            Topic: MDA18003

    General Sciences, Inc. (GSI) and Lockheed Martin (L/M, Valley Forge, PA), as a subcontractor, propose to incorporate solid-state exothermic composites and structures into the Hyper Velocity Projectile (HVP) to provide lethality enhancement in a non-hit-to-kill as well as a hit-to-kill option. The enhancement is based on the better coupling of the chemical as well as the kinetic energy inside the t ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  9. Hyper-Velocity Projectile (HVP) Warhead Optimization for Lethality

    SBC: DE TECHNOLOGIES, INC            Topic: MDA18003

    We propose to develop a directional side-projecting fragment warhead for the Hypervelocity Projectile (HVP). The warhead takes advantage of the HVPs ability to maneuver, including roll, to deliver a dense pattern of fragments within a narrow beam, providing a much greater number of impacts for enhanced lethality. The warhead makes use of technologies developed in several recent advanced-developmen ...

    SBIR Phase I 2018 Department of DefenseMissile Defense Agency
  10. IM Modeling/Simulation Tool for KEI Dynamic/Thermal Loads Associated with Stage Separation


    Intense dynamic and thermal loads will occur during stage-separation events that are of major concern from both operational and safety viewpoints. The insensitive-munitions (IM) stimuli and thermal/dynamic response associated with such events has received very little attention, yet this is of major concern for the KEI vehicle undergoing Stage 1 to Stage 2 separation. The KEI event is at lower alti ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government