You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. NDT of Fracture Toughness for Pipeline Steels

    SBC: FBS INC            Topic: 180PH1

    NDT of Fracture Toughness for Pipeline Steels 3/16/2018 Ultrasound-based technology to nondestructively determine fracture toughness of pipeline steels will be developed. Fracture toughness is the material parameter that, along with applied loading and flaw geometry, dictates the critical crack size, and therefore controls the flaw size that must be detected during inspections. A major challeng ...

    SBIR Phase I 2018 Department of Transportation
  2. Combined Cleaning and Guided Wave Inspection System for Hazardous Liquid Pipelines

    SBC: ULC TECHNOLOGIES LLC            Topic: 180PH2

    Combined Cleaning and Guided Wave Inspection System for Hazardous Liquid Pipelines 3/20/2018 For this SBIR we will develop a machine vision system which uses onboard standard-resolution cameras in vehicles to identify and read barcode signs on the roadside. The proposed approach could provide a low-cost solution that make connected and automated vehicle (CAV) technology viable for rural areas ...

    SBIR Phase I 2018 Department of Transportation
  3. Bottom Feeder- A Highly Maneuverable Autonomous Underwater Vehicle

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 822

    TECHNICAL ABSTRACT: Bottom Feeder will be a highly maneuverable Autonomous Underwater Vehicle (AUV), with a tethered operations option and modular sensor bay, to support benthic optical surveys, coral reef mapping and health assessment, and be expandable for future survey operations. It will integrate a low drag hullform, a minimum of four degrees of independent motion control, a highly efficient ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Doppler Wind Temperature Sounder

    SBC: BRANDYWINE PHOTONICS LLC            Topic: 8212

    TECHNICAL ABSTRACT: We propose developing a new observational capability for measuring upper atmosphere (20-Km to 200-Km+ altitude) wind and temperature dynamics, based on Doppler imaging of Limb concentrations of NO, N2O, and CO2 called the Doppler Wind Temperature Sounder. The principle of operation is that by measuring the Doppler shift of trace gases created by the differential velocity betwee ...

    SBIR Phase I 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Camera-based Examination of Risk via Behavioral Evaluation with Remote Underwater Surveillance

    SBC: Forever Oceans Corporation            Topic: 841

    TECHNICAL ABSTRACT: Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor in ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Design of an Autonomous, Green Powered, Mobile Coastal Monitor

    SBC: Tridentis Advanced Marine Vehicles LLC            Topic: 821

    TECHNICAL ABSTRACT: The mobile coastal monitor project is designed to prove out the research done in Phase I using a Proof of Concept demonstration craft. The Proof of Concept demonstrator will be a geometrically scaled version of the craft designed during Phase I. The Phase I craft, the Advanced Coastal Monitor (ACM) was designed to use state-of-the-art green power supplies and apply them as the ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Concrete Environmental Monitoring Sensor

    SBC: AVS US INC            Topic: 07FH3

    With infrastructure costs escalating it is becoming essential to monitor the health of concrete structures so that timely maintenance can maximize their useful lives. This SBIR will demonstrate the feasibility of using a passive sensor, embedded within concrete, to measure mositure, temperature, pH and concentrations of chlorides. It will provide critical data for evaluating concrete performance s ...

    SBIR Phase I 2008 Department of Transportation
  8. Pedestrain Exposure Measurement Technology Development

    SBC: CALSPAN CORPORATION            Topic: N/A

    Calspan Corporation, located in Buffalo, NY is proposing the research and development of the technology and methodolgy that can be used to accurately measure pedestrian exposure. Existing technologies/methodologies will be analyzed, and a technology/methodolgy that focuses on an individual pedestrian's walking history will be specified. Only technologies that are small, lightweight, reliable, an ...

    SBIR Phase I 2008 Department of Transportation
  9. PDA-Based Portable Data Collection System for Commercial Vehicle Inspection

    SBC: INTERNATIONAL ELECTRONIC MACHINES CORPORATION            Topic: 02FM1

    More than 1,300,000 Level 1 commercial vehicle inspections - a safety-critical, time-consuming, often difficult and painstaking process, especially as regards the brake inspection component -- are performed every year in the United States, under all sorts of weather and lighting conditions. The current technology used adds to the complexity and error potential inherent in this important task. In ...

    SBIR Phase II 2008 Department of Transportation
  10. Crack Arrest and Structural Repair of High Strength Steel Piping by In-Situ Sleeving of Nanostructural Materials

    SBC: Integran Technologies U.S.A. Inc.            Topic: 07PH1

    This proposal describes the application of a mature nanotechnology-based crack arrest / structural repair technology as a novel crack arrestor tool for high-strength pipelines. The crack arrestor would comprise a thin layer or sleeve of electrodeposited nanocrystalline material applied to the outside of the pipe either in the coating mill during fabrication or in-field during or following constru ...

    SBIR Phase I 2008 Department of Transportation
US Flag An Official Website of the United States Government