You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Roadway Pavement Condition Sensor

    SBC: FOSTER-MILLER, INC.            Topic: N/A

    This Phase II SBIUR (Small Business Innovative Research) proposal is based on work accomplished by Foster-Miller, Inc. and Battelle Memorial Institute during a prior Phase I SBIR program under contract DTRS57-99-C-00090. The purpose of the Phase I program was to develop an in-vehicle sensor to measure roadway surface conditions and, from these measurements, determine the coefficient of friction b ...

    SBIR Phase II 2001 Department of Transportation
  2. Wireless Brake Shoe Force Measurement System

    SBC: Mide Technology Corporation            Topic: 04FR1

    Railroad freight car safety and maintenance cost is directly related to knowledge of the actual braking force provided by a brake shoe. If the brake force is too low, safety is at risk. If the brake shoe is replaced before the end of it's lifetime to ensure safety, maintenance and thus operating costs are increased. Currently there is no system in place to monitor brake shoe force during train ...

    SBIR Phase II 2008 Department of Transportation
  3. Advanced Truck for High Speed Freight Operations

    SBC: Sharma & Associates, Inc.            Topic: 01FR1

    During Phase 1 of the project, Sharma & Associates, Inc. developed a concept for high speed freight truck intended for 70-ton, regular freight and bi-modal operation, at speeds up to 150 mph. The truck uses a rigid frame and an indpendent, compliant, primary suspension for its basic architecture. Constant contact side-bearings and yaw dampers were also added to improve dynamic performance. Vehi ...

    SBIR Phase II 2008 Department of Transportation
  4. Pipeline Integrity Assessment Using In-Line Inspection

    SBC: Jentek Sensors, Inc.            Topic: 132PH1

    This proposed Phase II effort will fabricate and test a working prototype ILI tool, including a pull-test on representative samples with representative defects under representative conditions. The focus is on oil pipelines, as well as gas pipelines. This program will address some pressing, high priority needs such as reliable characterization of longitudinal cracks (including cracks at ERW welds), ...

    SBIR Phase II 2015 Department of Transportation
  5. Self-Contained Sub Centimeter Positioning Platform

    SBC: TRUNAV LLC            Topic: 812N

    The goal of this project is to develop, prototype, and experimentally validate a new Differential Global Navigation Satellite System (DGNSS) capable of providing sub-centimeter positioning accuracy for quasi-static scientific, survey, and structural health monitoring application. The main feature of the proposed DGNSS solution is that it leverages publically available GNSS reference data from exis ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  6. Ultra-High Precision Laser Isotope Monitor for I3CO2, CO180 and CO170

    SBC: Aerodyne Research, Inc.            Topic: 831RC

    Greenhouse gas (GHG) emissions are primary drivers of global climate change. Hence there is a crucial need to quantify their sources and sinks. A powerful method to constrain source and sink strengths is the analysis of the relative proportions of isotopic variants of GHG’s in atmospheric samples like those collected globally by NOAA’s Cooperative Air Sampling Network. Measurements that are ca ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  7. Multi-Purpose Above Surface/Below Surface Expendable Dropsondes (MASED)

    SBC: Boston Engineering Corporation            Topic: 842W

    There are currently no inexpensive, expendable air-deployed monitoring systems (Dropsondes) that measure atmospheric data and oceanographic as a function of depth. These are important data in predicting the intensity and path of hurricanes. Boston Engineering proposes to provide NOAA with a solution to this challenge with the Multi-Purpose Above Surface/Below Surface Expendable Dropsonde (MASED) p ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
US Flag An Official Website of the United States Government