You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Gas-Kinetic Simulation of Separated Flows

    SBC: D&P LLC            Topic: SB072006

    This SBIR project proposes to develop a gas-kinetic CFD solver for separated turbulent flow simulation. After successfully developing prototype two-dimensional gas-kinetic BGK-NS/Burnett solvers and demonstrating the benefits of using higher-order hydrodynamic equations for separated turbulent flow simulation in Phase I, the technical objective of Phase II work will be to fully develop and validat ...

    SBIR Phase II 2008 Department of DefenseDefense Advanced Research Projects Agency
  2. 3D Visualization for Serpentine Robotic Systems

    SBC: LITE CYCLES, INC.            Topic: SB062023

    During the program baseline, LCI will develop an eyesafe, large array RT3D camera system that generates both 3D and 2D grayscale imagery in real-time that can be mounted on the iRobot PackBot. The 3D and 2D grayscale imagery can be fused in software to display both range and albedo information for each pixel in the 3D image, a display that will provide better scene understanding. During the option ...

    SBIR Phase II 2008 Department of DefenseDefense Advanced Research Projects Agency
  3. Development of Light-Weight, Low-Cost Multichannels Membrane Reformer

    SBC: ATS-MER, LLC            Topic: N/A

    A novel approach for the development of a lightweight, low-cost, compact, and quick start-up on-board fuel reformer is proposed in this Phase II program. The approach is based on a novel MER¿s technique for the fabrication of multichannel mini-reactors incorporating hydrogen separating membrane. Multichannel mini-reactor shrinks the dimensions through which energy and reactants travel to their ...

    SBIR Phase II 2001 Department of Transportation
  4. Magnetic MEMS Switches for RF Missile Seeker Applications

    SBC: MICROLAB            Topic: N/A

    The work proposed here consists of design, fabrication, packaging, and characterization of latching magnetic RF MEMS switches operational from dc through 40GHz. The active switching component of the device is a movable ferromagnetic cantilever thatelectrically shunts a gap in an on-chip transmission line (CPW and/or microstrip) to turn the switch ON and opens the gap to turn the switch OFF. Packag ...

    SBIR Phase II 2001 Department of DefenseDefense Advanced Research Projects Agency
  5. Addressing the Driving Needs of Short Stature Persons

    SBC: SAFE INC            Topic: 04NH1

    Phase I research on the development of a supplemental seating system for short stature drivers was undertaken by Safe Inc. in 2005. The purpose of Phase I was to demonstrate the feasibility of a device that would improve the ability of short stature drivers to safely operate a motor vehicle and to improve occupant crash safety. The study sought to examine the use of pedal extenders and other imp ...

    SBIR Phase II 2008 Department of Transportation
  6. Ultra-High Energy Density Piezoelectric Nanocomposites for Lightweight Power Harvesting Micro-Systems

    SBC: HARP ENGINEERING LLC            Topic: SB092001

    The proposed research effort will develop a highly efficient MEMS energy harvesters that utilize a novel nanocomposite technology recently developed by HARP Engineering LLC. Unlike existing piezoelectric nanocomposites, the material proposed here has an electromechanical coupling coefficient higher than most monolithic piezoceramics typically used in MEMS processing. This nanocomposite technolog ...

    SBIR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
  7. A Handheld Sensor for Amorphous Coating Integrity Evaluation

    SBC: ALPHASENSE, INC.            Topic: SB093002

    In the current SBIR program, AlphaSense aimed at developing a novel, handheld, non-destructive sensor to evaluate the integrity of Naval Advanced Amorphous Coatings (NAAC) in real time. In phase I, we have proven the feasibility of using the cavity perturbation technique to detect different types of defects present in thermal-sprayed testing coupons. Specifically, we optimized the sensor probe des ...

    SBIR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
  8. Integrated Power-Microclimate Cooling System for the Soldier

    SBC: CUBE Technology            Topic: A08116

    This program is expected to result in a combined, miniature Power/Microclimate cooling system for the soldier. The compact thermoelectric generator system will create significant power and have higher energy density than lithium technology batteries over extended missions. The highly integrated, and innovative microclimate cooler will result in a gravity-independent cooling system with high coef ...

    SBIR Phase II 2011 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government