You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. DEVELOPMENT OF AN ADVANCED FAN BLADE CONTAINMENT SYSTEM

    SBC: Advanced Structures Technology            Topic: N/A

    AN ADVANCED TURBINE ENGINE FAN BLADE CONTAINMENT SYSTEM USING CERAMIC TILES ON A POLYMER FIBER BACKING RING IS PRO- POSED. THE PROPOSED CERAMIC/POLYMER-FIBER SYSTEM HAS PROVEN MORE WEIGHT EFFECTIVE THAN MONOLITHIC METALLIC OR POLYMER MATERIALS FOR STOPPING PENETRATION OF BALLISTIC MUNITIONS PROJECTILES. IT IS EXPECTED THAT THIS TECHNOLOGY, ORIGINAL-LY DEVELOPED FOR AIRCRAFT ARMOR SYSTEMS, WILL DEC ...

    SBIR Phase II 1989 Department of Transportation
  2. Highly Monodispered MINIM Arrays for Single Electron Transistors

    SBC: AMSEN TECHNOLOGIES LLC            Topic: N/A

    As the current trends in transistor miniaturization are continued down to the molecular level ( in a dimension of tens of nanometers or less), the electronic properties of solids and solid-solid interfaces are inherently different on the nanometer level.It is becoming clear that continued increases in circuit density will require fairly dramatic changes in the way transistors are designed and ope ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  3. A Novel Method for Fabricating Ultra Low-Cost Radial Gradient-Index Glass Rods for Optic Communication Networks

    SBC: BEAMTEK, INC.            Topic: N/A

    This SBIR Phase II project proposed to develop a new fabrication technology that would lead to ultra low-cost, high quality radial gradient refractive index (GRIN) rods, which are widely used in fiber optic communications. Drastic cost reduction isexpected because several cost and labor intensive manufacturing processes will be eliminated, the product yield will be increased significantly compare ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  4. LOW CAPACITY RELIQUEFIER FOR STORAGE OF CRYOGENIC FLUIDS

    SBC: General Pneumatics Corporation            Topic: N/A

    A SELF CONTAINED LIQUEFIER IS BEING DEVELOPED TO RECONDENSE THE VAPOR BOILOFF FROM THE CRYOGENIC LIQUID STORAGE DEWARS OF LONG LIFE SPACE POWER SYSTEMS. THE PROOF-OF-PRINCIPLE LIQUEFIER FOR THE CHALLENGING DUTY OF HELIUM LIQUEFACTION IS A SMALL LOW CAPACITY (10 LITRES LIQUID HELIUM PER DAY) UNCOMPLICATED SYSTEM HAVING A LONG MAINTENANCE FREE OPERATING LIFE AND LOW INITIAL COST WITH MODEST AUXILIAR ...

    SBIR Phase II 1989 Department of DefenseMissile Defense Agency
  5. Development of Light-Weight, Low-Cost Multichannels Membrane Reformer

    SBC: ATS-MER, LLC            Topic: N/A

    A novel approach for the development of a lightweight, low-cost, compact, and quick start-up on-board fuel reformer is proposed in this Phase II program. The approach is based on a novel MER¿s technique for the fabrication of multichannel mini-reactors incorporating hydrogen separating membrane. Multichannel mini-reactor shrinks the dimensions through which energy and reactants travel to their ...

    SBIR Phase II 2001 Department of Transportation
  6. An Optoelectronic Pump-Sharing Module for Fiber-Amplifier Systems

    SBC: N.P. PHOTONICS, INC.            Topic: N/A

    Employing the sol-gel technology, the Phase II program intend to realize compact multimode interference (MMI) beam splitters integrated with semiconductor diode lasers on silicon for multi-channel pumping of Er3+ doped fiber amplifiers. The MMI splitterswill be designed for the 980-nm window in such a way that the pump-shared outputs will be achieved through a cavity formed between a diode laser ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  7. Compression Molding Multi-Functional Structure

    SBC: SPACEWORKS, INC.            Topic: N/A

    N/A

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  8. Addressing the Driving Needs of Short Stature Persons

    SBC: SAFE INC            Topic: 04NH1

    Phase I research on the development of a supplemental seating system for short stature drivers was undertaken by Safe Inc. in 2005. The purpose of Phase I was to demonstrate the feasibility of a device that would improve the ability of short stature drivers to safely operate a motor vehicle and to improve occupant crash safety. The study sought to examine the use of pedal extenders and other imp ...

    SBIR Phase II 2008 Department of Transportation
US Flag An Official Website of the United States Government