Award Data

Over 300 HF RADARs worldwide are producing ocean surface data that is used in oil spill response, search & rescue, vessel traffic management, and research. In the U.S. there are 100+ systems supplying real-time data to the Coast Guard, NOAA IOOS, OR&R and other operational groups. To provide the highest quality data to stakeholders, systems should be calibrated by measuring the receive antenna p ...

Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

Passive microwave sensors aboard satellites provide valuable information regarding weather conditions by measuring atmospheric attenuation over a broad range of frequencies from 0-200 GHz. Additional ground-based sensors are desirable to provide complementary upward looking measurements that can be used to refine existing attenuation models. Operating over such a large bandwidth, however, places ...

A preliminary design of a mobile receiver system for intra-cloud lightning detection, mapping, and tracking was completed and analyzed during the Phase I program. The direction-finding (DF) receiver design is small enough for use on small UAVs and utilizes the full VHF spectrum. The lightning Mapping Unmanned Sensor (LITMUS) design will be finalized, fabricated, assembled, and demonstrated durin ...

We propose to develop a system that can automatically detect, track, measure, and classify fish seen in video collected by stationary underwater cameras. Our approach makes use of a novel method for detecting motion that can mitigate false alarms due to swaying underwater vegetation. We propose a novel technique for tracking the fish in three spatial dimensions allowing for improved knowledge of ...

The development of a wireless mobile cloud platform that includes dynamic ride matching; utilizing in-vehicle systems and user interface; with supporting connectivity to social networks and HOV/HOT lane tolling infrastructure, will create a critical enhancement to enable an increase in ridesharing on the nation’s roadways. The objective of this Phase II research project is the development of a w ...

Despite heavy vehicles representing a small portion of vehicles on the roads, they have significant influences on pavement, safety, environment, energy consumption, and the performance of traffic system. Weigh-In-Motion (WIM) has been employed as a major technology to collect heavy vehicle data on freeways. Because WIM systems are costly and sophisticated, how to effectively utilize the valuable W ...

The primary objective of SBIR Phase II is to design and validate the data flow inside a smart work zone system by designing a framework that would enable exchanging work zone related messages between remote traffic management center server TMCS and the vehicles on the road. The framework will possess the following capabilities: • Ability to broadcast Traveler Information Messages (TIM) as well ...

A well-established method of differential GNSS corrections, referred to as real time kinematic (RTK), is applied to raw signals which can be obtained for inexpensive automotive grade GNSS designs. This technical approach to position determination is historically found only in higher cost survey grade devices. Today’s automotive class designs can achieve positional accuracies of slightly over one ...

A study conducted by The Boeing Company of world-wide commercial jet transport accidents found the most common events to be loss of control associated with an inability of pilots to recover from upsets and unusual attitudes. A key component in some of these events is pilot spatial disorientation (SD). Improved pilot training in these abnormal flight conditions, including the ability of training si ...