You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cost Competitive Wave Energy Without Moving Parts

    SBC: OSCILLA POWER INC            Topic: 815

    Oscilla Power, Inc. (OPI) is developing a utility-scale wave energy harvester that is enabled by low cost and readily-available magnetostrictive alloys. T his device, which utilizes no moving parts, has the potential to deliver predictable quantities of electric power to coastal utilities, industrial users, and remote facilities at costs competitive with coal or gas. The Phase I project demonstra ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  2. New NOAA-Derived Data Products for the TV Broadcast Market

    SBC: Worldwinds, Inc.            Topic: 832D

    This Phase II SBIR will execute the research to commercialization process developed in Phase I, when WorldWinds, Inc. developed and implemented a procedure to showcase graphical NOAA products for on-air consumption by the general public. Through collaboration with Baron Services, Inc., of Huntsville, AL, the Phase I project developed a prototypical composite Blended Total Precipitable Water produ ...

    SBIR Phase II 2011 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Noise and Artifact Reduction in Computed Tomography (CT) Images

    SBC: JDLL, INC.            Topic: AF05203

    Current high-energy computed tomography (CT) techniques for nondestructive testing (NDT) of solid rocket motors (SRM) and other large industrial objects often produce inferior imagery due to artifacts, impairing detection, identification, and measurement of anomalies. Phase I results verified that these artifacts arise from failure of assumptions implicit in the filtered backprojection algorithm. ...

    SBIR Phase II 2008 Department of DefenseAir Force
  4. Novel High Temperature Geopolymer for Spall-resistant Pavement Materials

    SBC: Sommer Materials Research, Inc.            Topic: AF071108

    During the last two decades, there has been considerable interest and research in inorganic polymers (“geopolymers”) for high-temperature applications. Geopolymers are manufactured by combining aluminosilicate powders with activating liquids through a polycondensation reaction. The resulting cured geopolymer can exhibit high compressive strengths after only four hours of set time. Geopolyme ...

    SBIR Phase II 2008 Department of DefenseAir Force
  5. Ceramic Matrix Composite (CMC) Structures for Vanes and Exhaust Nozzle Components

    SBC: EVISIVE LLC            Topic: AF071105

    The objective of this project is to optimize the design of a microwave interference scanning system and application procedure for use in the Ceramic Matrix Composite (CMC) manufacturing process. Quick, efficient in-process measurement of part porosity will be an integral part of pyrolysis cycle optimization. The feasibility of this application of the novel Evisive Scan microwave interference sca ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. Improved Radio Frequency (RF) Polymer Substrates for Antennas

    SBC: SPECTRUM MAGNETICS LLC            Topic: AF071134

    Based on multiple technology platforms and theoretical analyses, in the Phase I program we have demonstrated the feasibility that RF polymers with desirable high frequency properties can be achieved. Following Edison¡¯s model of product and process development for technology innovations, Phase-II will pursue further incremental improvement in material properties upon the concept-proving materi ...

    SBIR Phase II 2008 Department of DefenseAir Force
  7. W-band Microwave Amplifier Power Module

    SBC: INNOSYS, INC.            Topic: AF063001

    InnoSys proposes the advanced development of microwave power modules (MPMs) that combine monolithic microwave integrated circuit (MMIC) driver amplifiers with miniature traveling wave tube (TWT) amplifiers. This provides high power density at low cost and a small size and weight. When used as a driver amplifier in the MPM, the V/W band MMIC provides sufficient power and gain to drive the special ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. Noise and Artifact Reduction in Computed Tomography (CT) Images

    SBC: SENSING & EVALUATION TECHNOLOGIES, LLC            Topic: AF05203

    This proposal describes the continuation of a Phase I program to address the most significant sources of artifacts and noise in Computed Tomography (CT) images of large solid rocket motors (SRMs). Artifacts and noise can mask the presence of defects, as well as the subtle changes in composition due to aging, that can compromise the reliability and performance of the SRMs. Additionally, artifacts ...

    SBIR Phase II 2006 Department of DefenseAir Force
  9. Development of Advanced Polymer Based Photonic Crystal Devices and Fabrication Processes

    SBC: EM PHOTONICS INC            Topic: AF05135

    Photonic crystals have led the way for miniaturizing application specific optical integrated circuit (ASOIC) to a scale comparable to the wavelength of light which in turn made them a good candidate for next generation high-density optical systems and interconnects. Polymer based Photonic Crystal structures have potential applications in optical integrated circuits, optoelectronics, optical switch ...

    SBIR Phase II 2006 Department of DefenseAir Force
  10. AIMS: Agent-based Information Management System

    SBC: QUANTUM LEAP INNOVATIONS, INC.            Topic: AF05105

    Information Management is an important component in the development of viable information sharing systems, such as JBI, where shared information may be manipulated to derive further information. The qualities of such derived information depend on qualities of the contributing information and of their sources. Determining information quality requires propagation of qualitative and pedigree data abo ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government