You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Novel, Low Cost and Handheld Microwave Sensor for the Detection and Evaluation of Incipient Composite Heat Damage

    SBC: ALPHASENSE, INC.            Topic: N131013

    In this proposal, AlphaSense, Inc. details the development of a novel, low cost and handheld microwave sensor for the detection and evaluation of incipient composite heat damage. The merits of the proposed sensor and its advantages over other techniques are listed below: a) Compact, handheld and low cost, b) Sensitive for incipient heat damage detection, c) Capable of quantitative analysis of the ...

    SBIR Phase I 2013 Department of DefenseNavy
  2. Dynamic Frequency Passive Millimeter-Wave Radiometer Based on Optical Up-Conversion

    SBC: Phase Sensitive Innovations, Inc.            Topic: 941D

    In the proposed effort, we will leverage this extensive experience and capabilities to realize a frequency agile mmW radiometer that can cover the range of DC-110 GHz and can be scaled to DC-200 GHz under Phase II. Ours is a photonic system that multiplies and up-coverts a low-frequency reference signal onto an optical carrier (laser) using EO modulation, then uses the modulation sidebands to inj ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Frequency Agile Millimeter Wave (MMW) Signal Generator

    SBC: Phase Sensitive Innovations, Inc.            Topic: N131080

    PSI will leverage our extensive experience and unique capabilities in MMW photonics to design a compact, lightweight, frequency-agile MMW source combining wide, continuous, rapid tunability with superb phase noise and moderate output power. Such a source will have extensive commercial applications in next-generation wireless communications, as well as military applications including reconfigurable ...

    SBIR Phase I 2013 Department of DefenseNavy
  4. Advanced Modular, Energy Storage Technology

    SBC: ALTAIRNANO, INC.            Topic: N091053

    The SBIR Phase I proposal is designed to improve the high end temperature performance of Altairnano''''s nano Lithium titanate batteries and will develop an equivalent circuit model capturing the transient dynamics of Altairnano’s 50 Ah cell. Altairnano will study the effects of various materials and the interactions between them to determine the best electrode material combination in order to e ...

    SBIR Phase I 2009 Department of DefenseNavy
  5. Development of a Total Residual Oxidant Sensor Development of a Total Residual Oxidant Sensor

    SBC: HALOGEN SYSTEMS, INC.            Topic: N092152

    Recent efforts at improving shipboard operations have focused on desalination systems. One area in which manpower may be significantly reduced is in the monitoring chlorine residuals from hypochlorite enhanced streams that are used for periodic biofouling control flushes of microfiltration membranes. These are used for pretreatment of seawater prior to exposure to reverse osmosis membranes used fo ...

    SBIR Phase I 2009 Department of DefenseNavy
  6. ICING MONITORING EQUIPMENT

    SBC: JONAS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of Transportation
  7. Advanced Lithium-ion Modular Energy Storage Batteries

    SBC: K2 ENERGY SOLUTIONS, INC.            Topic: N091053

    K2 Energy Solutions, Inc. will address the Navy’s energy storage requirements by designing and fabricating a modular battery system similar to those the company has already developed for high performance electric vehicles. K2 develops and manufactures advanced lithium-ion energy storage systems based on intrinsically safe and inexpensive lithium iron phosphate cathode materials.

    SBIR Phase I 2009 Department of DefenseNavy
  8. Innovative Weight Reduction Concepts for Unmanned Surface Vehicles (USVs)

    SBC: Kubota Research Associates            Topic: N091047

    This SBIR Phase I project will develop and innovative sandwich composite material used to manufacture component parts and/or the hull for an Unmanned Surface Vehicle (USV) to reduce the weight and increase operational effectiveness. The composite structure includes an inner layer of high tenacity polyarylate LCP long fiber reinforced ionomer. The reinforced resin is extrusion molded directly into ...

    SBIR Phase I 2009 Department of DefenseNavy
  9. Detection and Mitigation of Electrical Faults in Medium Voltage DC (MVDC) Architectures

    SBC: CREATIVE ENERGY SOLUTIONS, INC.            Topic: N091050

    The proposed technology has the potential to change the paradigm such that the traditional “brute-force” method of the mechanical breaker is replaced with natural commutation. Further, a downfall of the conventional solid-state breaker is that it still must interrupt large fault currents requiring very specialized semiconductors and controls. Ultimately, the dc breaker herein prevents large cu ...

    SBIR Phase I 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government