You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Cooling/Thermal Management System Development for Active Denial Technology (ADT) and High-Power Radio-Frequency vehicle Stopper (RF) Systems

    SBC: International Mezzo Technologies, Inc.            Topic: N102110

    The heat exchanger in the Nacelle of the V-22 Osprey cools gearbox oils and hydraulic oil. In operation, the current heat exchanger becomes clogged with sand and dust and the engine overheats. Also, the current unit is very difficult to clean. A micro tube heat exchanger with large air passages offers the potential to alleviate this problem. In this program, Mezzo will design and manufacture, and ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Automated Tick Collecting Device

    SBC: HITRON TECHNOLOGIES INC            Topic: DHP163004

    Leveragingour expertise in electro-opto-mechanical device development and system integration (hardware and software) and the Phase-I achievement, Hitron Technologies Inc. (HTI) proposes to develop an autonomous solution tentatively named Tick Collection

    SBIR Phase II 2018 Department of DefenseDefense Health Agency
  3. ATTICUS: Attentional Trainer To Improve Control of Unmanned Systems

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: N162090

    The increased use of Unmanned Aerial Systems (UAS) to meet diverse Navy mission requirements has been accompanied by mounting safety concerns. Two significant human causal factors contributing to UAS mishaps are channelized attention and fatigue. Channelized attention refers to allocating attention to a channel of information at the expense of other, potentially more important channels. Fatigue ca ...

    SBIR Phase II 2018 Department of DefenseNavy
  4. Develop integrated analog photonic modulator components compatible with photonic foundry production

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF171126

    In phase II work, we will collaborate with Prof. Dennis W. Prather in UD and continue to develop broadband, low VÏ€, high linearity, thin-film lithium niobate on insulator (LNOI) modulators that are fully compatible with silicon photonic integrated circuits (PIC) foundry processes. We will demonstrate a low VÏ€, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  6. Dynamic and Efficient Vapor Compressor

    SBC: BASCOM HUNTER TECHNOLOGIES INC            Topic: AF171057

    This Air Force SBIR project will develop and demonstrate a refrigerant vapor compressor that can provide up to 150 kW nominal cooling capacity.The developed compressor will be dynamically responsive to the needs of the vapor cycle system and can sustain high efficiency while providing cooling over the entire range of operating conditions for next generation aircraft.

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Dynamic and Efficient Vapor Compressor for Aircraft Thermal Management Systems (TMSs)

    SBC: S-Ram Dynamics, LLC            Topic: AF171057

    S-RAM Dynamics (S-RAM) will design, fabricate, test, and commercialize a high-performance axial piston transcritical CO2 energy recovery compressor (ERC) to support next-generation aircraft thermal management systems for the U.S. Air Force and commercial applications

    SBIR Phase II 2018 Department of DefenseAir Force
  8. Multicore Fiber Optic Package Optical Subassembly for Wideband Digital and Analog Photonic Links

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: N182101

    In this SBIR effort we will develop a balanced detection analog photonic link consisting of a DFB laser, a dual-output high-speed, low-Vp mach-zehnder modulator (MZM) and a high-power, high-linearity balanced photodetector (BPD) using a dual-core, single mode, multicore fiber (MCF) that is supplied by our subcontractor, OFS. We will design, fabricate and characterize (phase I) the MZM and the BPD, ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. InSite: Targeted Training Content Management

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: A18092

    To respond to ever-evolving enemy tactics, realistic, effective training is needed in the operational environment. The Army has, and is currently developing, numerous computer-based resources to support scenario-based training at the point of need. To support the personnel who use these training systems, a content management system is needed. Further, recommendations for training, and adaptively c ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government