You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Nickel Aluminum Bronze for Additive Manufacturing Alloy Development

    SBC: QUESTEK INNOVATIONS LLC            Topic: N171088

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to design and optimize a new Nickel Aluminum Bronze (NAB) alloy for use as feedstock material in directed energy deposition (DED)-based additive manufacturing (AM) in order to enable the development of AM technologies for quicker, cheaper, and more reliable production and repair of NAB ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Cooling/Thermal Management System Development for Active Denial Technology (ADT) and High-Power Radio-Frequency vehicle Stopper (RF) Systems

    SBC: International Mezzo Technologies, Inc.            Topic: N102110

    The heat exchanger in the Nacelle of the V-22 Osprey cools gearbox oils and hydraulic oil. In operation, the current heat exchanger becomes clogged with sand and dust and the engine overheats. Also, the current unit is very difficult to clean. A micro tube heat exchanger with large air passages offers the potential to alleviate this problem. In this program, Mezzo will design and manufacture, and ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Optimized High Performance Stainless Steel Powder for Selective Laser Melting Additive Manufacturing (AM)

    SBC: QUESTEK INNOVATIONS LLC            Topic: N16AT007

    Additive Manufacturing (AM) promises to be an innovative technology that can enable rapid manufacturing of complex parts at greatly reducedcycle time. With the maturation of selective laser melting (SLM) AM technologies there is increasing interest in applying this manufacturingmethod to the production of aircraft structural components, many of which are made of high-strength stainless steels. How ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Advanced Development for Defense Science and Technology: Measurement Tools for Quantum Information Processing

    SBC: NUCRYPT LLC            Topic: SB082007

    The special properties of quantum states make them attractive for emerging applications in quantum communication and computing. However, the very properties of quantum states that make them useful also make them difficult to measure. Quantum state tomography is a measurement tool which allows for complete characterization of quantum states. Although great progress has been made in researching quan ...

    SBIR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  5. A Low-Cost, High Performance Collodial Quantum Dot MWIR Focal Plane Array

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: ST13B002

    There is a growing need for the wider deployment of infrared cameras in various defense applications, from handheld to vehicle-mounted. Meeting this requires a low-cost imaging device that has low noise and high frame rates. Microbolometers largely fill this need in the longwave infrared regime, although they suffer from relatively slow response times and are near their technological performance l ...

    STTR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  6. Multi-Spectral Threat Warning Adjunct Sensor

    SBC: EPIR, INC.            Topic: A17052

    EPIR and Brimrose propose to design and fabricate multiband infrared adjunct (MIRA) sensors to enhance the detection/identification capability of the existing aviation-threat warning systems. Four spectrometers, arranged in a linear array, are designed to cover the wavelength range from ultraviolet to long-wave infrared. Each spectrometer is an integration of an acousto-optic tunable filter (AOTF) ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. High-Speed Image Processing in Heavily Degraded Environments Using a Machine Learning Classifier

    SBC: SIVANANTHAN LABORATORIES, INC.            Topic: A17046

    Driving ground vehicles in heavily degraded visual environments brings significant risk since course corrections cannot be made safely without visual cues. Infrared imagery can improve visibility in degraded visual environments, however when heavily degraded, this method alone is insufficient. Obscurants and noise can be rapidly categorized and suppressed in real-time by having an artificial intel ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Embedded IR (embIR) Thermal Imaging Camera for Nano-UAVs

    SBC: RPX TECHNOLOGIES INC            Topic: A16110

    Currently available thermal cameras do not meet the combined weight, power, field-of-view (FOV), and detection requirements necessary for use on nano-UAVs for applications such as Soldier Borne Sensors (SBS). Increasing the angular FOV while maintaining a desired probability of detection under specified conditions typically means increasing pixel count. Once the detector technology is at the minim ...

    SBIR Phase II 2018 Department of DefenseArmy
  9. Develop integrated analog photonic modulator components compatible with photonic foundry production

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF171126

    In phase II work, we will collaborate with Prof. Dennis W. Prather in UD and continue to develop broadband, low VÏ€, high linearity, thin-film lithium niobate on insulator (LNOI) modulators that are fully compatible with silicon photonic integrated circuits (PIC) foundry processes. We will demonstrate a low VÏ€, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide ...

    SBIR Phase II 2018 Department of DefenseAir Force
  10. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
US Flag An Official Website of the United States Government