List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  2. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: Reliable MicroSystems, LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  3. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Generator Power Recapture

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: AF161008

    The Air Force rebuilds and tests many aircraft and ground-power generators each year, involving many hours of loaded run-time with dissipative load banks. To improve facility energy efficiency and to have a positive environmental impact, a regenerative ac/dc load bank is proposed to push power from generator testing back to the electric grid. The proposed generator power recapture unit (GPRU) will ...

    SBIR Phase II 2018 Department of DefenseAir Force
  5. Advanced Durability Systems for Unmanned Aerial Vehicle Propulsion

    SBC: IBC Materials & Technologies, LLC            Topic: SOCOM163002

    Group 2-3 UAS engines have low mean time between overhauls (MTBOs), often with as little as 200-400 hours before maintenance must be conducted.This leads to significant maintenance cost and logistics tail for deployed operations.Two-stroke piston and rotary engines for Group 2-3 platforms have common maintenance drivers such as carbon fouling, and wear of cylinders, housings and bearings.Phase I r ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  6. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk.There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution.Radio frequen ...

    STTR Phase II 2018 Department of DefenseAir Force
  7. Effects of sustained vibration and high temperature environments on polymer bonded composite materials

    SBC: LEVEL 6 ENGINEERING LLC            Topic: AF181005

    Comparatively little research has explored the influence of mechanical vibrations on energetic materials (or other polymer-bonded composite materials), despite the importance of these materials in defense-related applications.Recently, interest has started to grow, but the vast majority of research has been focused on developing a basic physical understanding, rather than establishing standardized ...

    SBIR Phase I 2018 Department of DefenseAir Force
  8. Rotating Detonation Engines for Increased Payload to Orbit at Lower Cost

    SBC: IN SPACE, L.L.C.            Topic: AF181030

    The space launch community has been pursuing improvements in performance and efficiencies leading to higher specific impulses since the inception of rocketry. This effort has been largely successful reaching near theoretical limits for constant pressure combustion devices leaving little margin for higher specific impulses. Todays advances in traditional rocket engines focus on incremental improvem ...

    SBIR Phase I 2018 Department of DefenseAir Force
  9. 6000297

    SBC: Chip Design Systems            Topic: AF18AT017

    We propose to develop an innovative concept of the high speed dynamic IRSP that combines components and devices from proven suppliers with novel system-level research topics from CDS and University of Delaware. Having previously built and delivered working LED IRSPs to users gives CDS a unique advantage. In line with system theme of the solicitation, our phase 1 research topics are focused on syst ...

    STTR Phase I 2018 Department of DefenseAir Force
  10. High Capability Portable Foreign Object Debris (FOD) Removal System for Naval Aircraft

    SBC: ROBOTIC TECHNOLOGIES OF TENNESSEE            Topic: N162104

    The United States Marine Corps (USMC) spends tens of millions annually on foreign object debris (FOD) damages related to the AV-8B Program and the DOD up to $100 million in total on FOD related problems. RTT proposes to create mechanized, semi-automated and autonomous solutions to clear and maintain FOD free workspace areas in the three targeted FOD problem areas. This Phase 2 effort focuses on cr ...

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government