You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fiber Reinforced Aluminum Crack Repair for Aluminum Structures

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: N161069

    Touchstone proposes to build on the Phase I effort to incorporate its MetPreg fiber reinforced aluminum material into a concept for bonded-on repairs to cracked aluminum ship hulls and superstructure. The method would not require logistics beyond that which is normally available to ship’s force or entail the use of materials with short shelf life. MetPreg has been shown to arrest cracks in 7xxx ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Develop integrated analog photonic modulator components compatible with photonic foundry production

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF171126

    In phase II work, we will collaborate with Prof. Dennis W. Prather in UD and continue to develop broadband, low VÏ€, high linearity, thin-film lithium niobate on insulator (LNOI) modulators that are fully compatible with silicon photonic integrated circuits (PIC) foundry processes. We will demonstrate a low VÏ€, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide ...

    SBIR Phase II 2018 Department of DefenseAir Force
  3. Weather Analysis-as-a-Service (WA3S)

    SBC: NEXTGEN FEDERAL SYSTEMS LLC            Topic: AF171035

    Due to growing requirements for weather exploitation across a wide variety of mission applications, coupled with high perishability of the environmental data, the dissemination of data for use in weather impact analysis is putting an increasing strain on the bandwidth connecting the AFW to its consumers. Additionally, the AFW Enterprise has not yet taken full advantage of emerging DoD cloud platfo ...

    SBIR Phase II 2018 Department of DefenseAir Force
  4. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  5. High Capability Portable Foreign Object Debris (FOD) Removal System for Naval Aircraft

    SBC: ROBOTIC TECHNOLOGIES OF TENNESSEE            Topic: N162104

    The United States Marine Corps (USMC) spends tens of millions annually on foreign object debris (FOD) damages related to the AV-8B Program and the DOD up to $100 million in total on FOD related problems. RTT proposes to create mechanized, semi-automated and autonomous solutions to clear and maintain FOD free workspace areas in the three targeted FOD problem areas. This Phase 2 effort focuses on cr ...

    SBIR Phase II 2018 Department of DefenseNavy
  6. Hierarchical, Layout-Aware, Radiation Effects Tools Vertically Integrated into an EDA Design Flow for Rad-Hard by Design

    SBC: RELIABLE MICROSYSTEMS LLC            Topic: DTRA16A003

    The goal of this workis to establish a radiation-aware capability in a commercial EDA design flow that will enable first-pass success in radiation resiliency for DoD ASIC designs in much the same way that existing EDA design suites ensure first pass functionality and performance success of complex ASICs destined for commercial applications.Such an integrated capability does not presently exist.The ...

    STTR Phase II 2018 Department of DefenseDefense Threat Reduction Agency
  7. Metal Matrix Composite Axial Propulsion Missile Components

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: MDA05068

    The overall objective of the proposed effort is to more fully develop a solid rocket motor case based on aluminum metal matrix composites (Al MMC) that will maintain or increase the performance of Navy rocket motors and improve compliance with insensitive munitions (IM) requirements. Touchstone Research Laboratory will use a modified filament winding process for producing Al MMC cases for technolo ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Multicore Fiber Optic Package Optical Subassembly for Wideband Digital and Analog Photonic Links

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: N182101

    In this SBIR effort we will develop a balanced detection analog photonic link consisting of a DFB laser, a dual-output high-speed, low-Vp mach-zehnder modulator (MZM) and a high-power, high-linearity balanced photodetector (BPD) using a dual-core, single mode, multicore fiber (MCF) that is supplied by our subcontractor, OFS. We will design, fabricate and characterize (phase I) the MZM and the BPD, ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. Small form-factor, Relocatable, Unattended Ground Sensor

    SBC: NEXTGEN FEDERAL SYSTEMS LLC            Topic: A18022

    Intelligent Multirotor Autonomous Glider for Relocatable Sensors (IMAGRS) is an innovative and highly capable micro Unmanned Aircraft System (UAS) that enables unattended multi-spectral imaging and processing. IMAGRS integrates existing technologies into a micro, hybrid, transforming UAS which acts autonomously as a relocatable imaging sensor. The hybrid design of IMAGRS will enable the platform t ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government