List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Development of Innovative Broad-Spectrum Analysis Methods for PFAS

    SBC: SEACOAST SCIENCE, INC.            Topic: 17NCER3A

    This SBIR addresses EPA’s need for improved sampling and analysis technologies to detect Per- and Polyfluoroalkyl Substances (PFAS). PFAS are used in firefighting sprays, at airports, and for wild fires, and have been used in textile treatments (e.g., it is a component in Scotchgard). It is estimated that 65 million Americans are at risk of PFAS exposure in their drinking water. Seacoast propose ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Renewable Bioplastics Production

    SBC: Altex Technologies Corporation            Topic: 17NCER5A

    Altex’s Renewable Bioplastics Production (RBP) technology meets the Greener Plastic Manufacturing needs; to eliminate harmful-petrochemical feed sources, to accomplish toxic-free, low-energy, low cost bioplastics production, to reduce Green House Gas (GHG) emissions, and to have environment friendly-biodegradable bioplastics. Altex’s proposed RBP technology combines a novel feeding-sizing-pret ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Greener Plastics with High Heat Tolerance for Additive Manufacturing

    SBC: Intelligent Optical Systems, Inc.            Topic: 17NCER5B

    Advances in materials and automation are rapidly reshaping the American manufacturing economy. These advances must be embraced to sustain a strong manufacturing sector in the United States. Additive manufacturing is possibly the fastest growing example of this trend, growing at an astonishing compound annual growth rate of 25.7%. The plastic materials market for additive manufacturing, valued at $ ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. A GREEN AND UNIQUE THERMOSETTING-THERMOPLASTIC POLYCARBONATE

    SBC: INSTRUMENTAL POLYMER TECHNOLOGIES, LLC            Topic: 16NCER2B

    Of the 300 million tons of plastic produced per year most will require 500 years to biodegrade. Currently only 9% is recycled, and 50 million tons of thermoset plastic produced annually that can't be recycled. _x000D_ _x000D_ This project will develop a sustainable and easily biodegradable polycarbonate plastic that is uniquely a recyclable thermoset resin. We call it a thermosetting thermoplastic ...

    SBIR Phase II 2018 Environmental Protection Agency
  6. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: Engineering And Software System Solutions, Inc.            Topic: DLA171002

    Maintaining the many types of weapons systems within the Department of Defense (DoD) is a tremendous task and procuring replacement components is made especially difficult due to obsolescence and often time, excessive pricing. Many components are no longer available from the Original Equipment Manufacturer (OEM) and the DoD does not have sufficient documentation to develop new suppliers. A new, s ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  7. Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs

    SBC: SAN DIEGO COMPOSITES, INC.            Topic: DLA171002

    San Diego Composites, Inc. (SDC) will provide the Defense Logistics Agency (DLA) qualified environmentally stable composite (ESC) replacement parts as an alternative source of supply for the parts on the DLA published Land and Maritime Replenishment Parts Purchase or Borrow and Limited Source Candidate Parts lists. SDCs ESC parts can be produced up to 75% faster, require up to 98% less preventativ ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  8. Develop Alternate Source of Supply for NSN 6130-015487556 Battery Charger

    SBC: Spectral Labs Incorporated            Topic: DLA171002

    During Phase I, Spectral labs proposes using our multi-disciplined engineering, quality assurance, and production staff to reverse engineer an NSN 6130-015487556 Battery Charger, P/N RF-5853-CH106 in order to become an approved source. We will prepare a Source Approval Request (SAR) which includes a complete Technical Data Package and Test Plans. Following established ISO 9001 certified processes, ...

    SBIR Phase I 2018 Department of DefenseDefense Logistics Agency
  9. Assistive Compact Convolutional Enhanced Neural Targeting System

    SBC: PHYSICAL OPTICS CORPORATION            Topic: N172102

    To address the Marine Corps need, Physical Optics Corporation (POC) proposes to develop a new Assistive Compact Convolutional Enhanced Neural Targeting (ACCENT) system based on a new design using convolutional neural network (CNN) software implemented on embedded hardware for assisted target recognition and laser pointing. Specifically, the innovation in image processing algorithms and automatic t ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government