You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Innovative Approaches to Agile Software Development for Secure Modular Avionics Architectures

    SBC: AVILUTION            Topic: A16117

    Avilution is performing pioneering work to further the development of the eXtensible Flight System(XFS), a suite of portable avionics software applications with a common framework, which allows streamlined integration of new sensors, safety, and technology for private andcommercial aviation. Avilution uses rapid software development practices with new ideas and technologies to create an innovative ...

    SBIR Phase II 2018 Department of DefenseArmy
  3. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Dynamic Near-Field Radar Target Modeling in Scene Generator Systems

    SBC: Signature Solutions, Inc.            Topic: A18005

    High fidelity scene generators utilize radar target models over the entire flight profile of a weapon system or sensor under test.As such, radar signatures generated from these models must encompass the entire simulation flight path to include a continuum of engagement conditions ranging from the far-field to very near-field.Signature Solutions, Inc. proposes a technical approach for dynamic and c ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Development of a Lightweight Turbocharger that Delivers 108 HP at 30K ft Altitude for UAV's using Compression Ignition Engines

    SBC: Hartzell Engine Technologies LLC            Topic: A18019

    The Department of Defense desires to develop and produce a reliable turbocharger for an aviation compression-ignition engine with a maximum power of 180 hp at sea level which additionally provides 60% of maximum sea level power at 30,000 ft.The challenge is to reliably provide adequate manifold pressure to achieve the desired power at altitude.Diesel engines with existing standard turbocharger tec ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Common Engine Software Interface (FADEC) Component

    SBC: AVILUTION            Topic: A18080

    Avilution proposes to develop a common engine interface architecture aligned with the FACE Technical Standard, providing an abstraction to allow common engine information to be accessed from a variety of FADECs or engine controllers. The work will build on existing XFS ECU interfaces and the FACE alignment work already in progress in order to develop a common interface for FADECs implemented as FA ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. High Density Liquid Hydrogen Missile Fuel

    SBC: THE SENTIENT CORP            Topic: A10152

    Fuel applications for scramjet powered flight greater than Mach 8 require the injection, mixing and combustion process to complete in a very short period of time.The one limiting factor restricting the speed at which a scramjet can operate relates directly to the time it takes for the fuel and air to mix and burn.Using hydrogen as the fuel source brings this time to a minimum.Due to the low densit ...

    SBIR Phase II 2018 Department of DefenseArmy
  10. Printable Materials with Embedded Electronics and Radio Frequency Components

    SBC: EngeniusMicro, LLC            Topic: A16006

    Additive Manufacturing is a disruptive technology that has the ability to change how components are made, used and repaired. The past 10 years have seen a rapid increase in the availability of low-cost 3D printers. The sophistication, quality, and ease of use for these tools has been increasing rapidly while the cost is decreasing. There exists an emerging opportunity to combine printed electronic ...

    SBIR Phase II 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government