You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Chemical-Biological Forensic Evidence Container with Agent and Tamper Resistant Tools

    SBC: NanoScale Materials, Inc.            Topic: A10aT003

    The proposed research incorporates several inventions to produce structural components that are assembled into a highly enhanced Toxic Material Forensic Container (TMFC) for transport and storage of contaminated articles. Bio-hazardous materials are frequently encountered in investigations, and the current evidence containers are designed to handle the issues associated with those materials. Howe ...

    STTR Phase II 2012 Department of DefenseArmy
  2. Enhanced Drying of Pipeline Ethanol

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: H

    There continues to be a need for low cost production and shipment of fuel-grade ethanol from agricultural sources. Ethanol from agricultural sources has many advantages including developing fuel independence and significantly reducing greenhouse gases. Also, bio-ethanol has significant value as an oxygenated and octane improver. Although ethanol from agricultural sources has many advantages, th ...

    SBIR Phase I 2012 Environmental Protection Agency
  3. A Handheld, Low Cost, and High Throughput Sensor for Fatty Acid Methyl Ester Detection and Quantifications in Military Fuels

    SBC: ALPHASENSE, INC.            Topic: A12058

    Although biodiesels have been increasingly used in automobiles, trains, commercial aircrafts and heating systems, they are not currently used in the military aircrafts and land vehicles because they typically do not meet the JP-8 performance criteria as specified by MIL-PRF-83133E. Unintentional contaminations by the biodiesels into the jet fuels can introduce adverse effects, including engine ope ...

    SBIR Phase I 2012 Department of DefenseArmy
  4. Electrically Generated Haptic Feedback to Simulate Virtual Explosions

    SBC: ARC TECHNOLOGY LLC            Topic: A12074

    This proposal details the development of a variable pulsed power circuit and custom load that simulates the audio, visual, and tactile response of a variety of explosive devices. The system operates by tailoring the voltage and current discharge profile through the stimulus generator at the operating point that best matches the signature of the explosive device. The device resets itself and ...

    SBIR Phase I 2012 Department of DefenseArmy
  5. Heat Actuated Cooling System

    SBC: Rocky Research            Topic: A09090

    The principal objective of this effort is to develop an advanced complex compound for ammonia-solid absorption chillers and demonstrate the enhanced sorbent for a 18,000 BTU/hr technology demonstrator in the Phase II effort. Phase I experimental data showed that it is feasible to make a fuel-fired sorption cooling system capable of 18,000 Btu/hr cooling and 105 kg dry-weight with 0.34 gal/hr of JP ...

    SBIR Phase II 2012 Department of DefenseArmy
  6. Development and Scale-Up of Nanothermite Composites for Propellant Ignition

    SBC: INNOVATIVE MATERIALS & PROCESSES INC            Topic: A10050

    The main objective of this proposal SBIR Phase II project is to scale-up and demonstrate the low-cost formation of 15-35 kg/yr of nanothermite-nitrocellulose composite granules for propellant ignition and as additives to explosive materials. All of the reactants used for the energetic composites will be made from United States produced materials. The reactive composites will use a base nanothermit ...

    SBIR Phase II 2012 Department of DefenseArmy
  7. First Generation of Controlled-Release Bacteriocins/Anti-Microbials

    SBC: ORBIS BIOSCIENCES, INC.            Topic: A11127

    Combat ration Intermediate Moisture (IM) products use low pH and water content (aw) to discourage bacterial growth. The long-term goal of this proposal is to maintain the microbial stability of ration components over a two-year shelf life while increasing the pH and aw values for an improved organoleptic profile. The specific objective of this Phase I application is to develop microspheres for co ...

    SBIR Phase I 2012 Department of DefenseArmy
  8. High Efficiency Mobile Ice Maker (HEMIM)

    SBC: Rocky Research            Topic: A10164

    Proposed is the continuation of development of a High Efficiency Mobile Ice Maker (HEMIM) for the Army that is capable of integrating DC power from solar PV cells. The proposed ice maker will include a variable capacity vapor compression system with variable air flow as per ambient temperatures. The Performance of the high efficiency cycle will be enhanced by the use of advanced variable speed dri ...

    SBIR Phase II 2012 Department of DefenseArmy
  9. Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: A16AT002

    The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Army’s ne ...

    STTR Phase II 2018 Department of DefenseArmy
  10. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
US Flag An Official Website of the United States Government