You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of a Small-Scale HTST Milk Processing Line for Small and Mid-Size Dairy Farms

    SBC: Atlantic Corporation            Topic: 812

    Project Description and Objectives:The overarching goal of this SBIR project is to develop a cost-effective, small-scale milk processing line for HTST pasteurization as a pathway to increased revenue and profitability for small and mid-size dairy farms. Intensive research will answer critical questions in two key areas: 1) Technical Feasibility - analysis of currently available processing line com ...

    SBIR Phase I 2018 Department of Agriculture
  2. Technical and market feasibility of kelp meal as a nutritional supplement in low-moisture foods

    SBC: VitaminSea LLC            Topic: 812

    VitaminSea, LLC (VitaminSea) is developing a kelp-based additive, "SeaKelp+," for bread, optimized to bring the nutritional benefits of consuming seaweed to a large population of consumers. VitaminSea met both of the Phase I SBIR project's technical objectives. Objective #1 proved feasibility of adding kelp to bread, creating a more nutritious product that consumers would eat with a longer she ...

    SBIR Phase II 2018 Department of Agriculture
  3. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Formulation and testing of an entirely wood-based exterior insulation board for the high-performance building market

    SBC: GO Lab Inc.            Topic: 17NCER6B

    The goal of this project is the formulation a rigid, insulating, low-density wood composite, with physical and thermal properties comparable to fossil fuel derived foams. _x000D_ _x000D_ To achieve energy conservation standards mandated by certification agencies such as Passive House and LEED, high performance buildings require multiple shells of insulation – an inner shell that contains electri ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    GPS Disciplined Oscillator (GPSDO) systems traditionally combine the 1PPS output from a GPS receiver and highly stable clock like a Chip Scale Atomic Clock (CSAC) to steer the local clock frequency to match the frequency and phase of the GPS-generated 1PPS. However, the GPS receiver does not take advantage of the stable Chip Scale Atomic Clock for improved GPS receiver resilience, improved positio ...

    SBIR Phase II 2018 Department of DefenseArmy
  9. Non-Pyro Electric Small Arms Fire Simulator

    SBC: Digital Solid State Propulsion, Inc            Topic: A18091

    Digital Solid State Propulsion Inc. is proposing the development of a reusable electric blank system that leverages over 10 years of success in formulating, engineering, and manufacturing Electric Solid Propellants for the space, defense, and entertainment industries. DSSP already has a pyrotechnic solution to battlefield effects simulating small arms fire based on eSquib technology, however, for ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Development of a modular submersible mussel raft for use in semi-exposed Maine waters subject to drift ice.

    SBC: PEMAQUID MUSSEL FARMS, L.L.C.            Topic: 87

    In this SBIR Phase I project, Pemaquid Mussel Farms (PMF) seeks to determine the feasibility of fabricating a submersible mussel raft that will eliminate problems associated with surface mussel rafts (mussel drop off, wave and ice damage to rafts, lower yields, visual impacts) while improving crop production and quality. In the northeast and northwestern U.S., the preferred method of mussel suspen ...

    SBIR Phase I 2012 Department of Agriculture
US Flag An Official Website of the United States Government