You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fuel Efficient Nanofluid Gear Oil

    SBC: Pixelligent Technologies, LLC            Topic: A15AT018

    Improving vehicle fuel efficiency for the military can significantly reduce costs and reduce risk to solider safety. One way to improve vehicle efficiency for new and legacy vehicles is to reduce frictional loses in the drivetrain through use of lower viscosity lubricants. However, this comes with the risk of reducing durability of drivetrain components through increased wear, pitting and scuffing ...

    STTR Phase II 2018 Department of DefenseArmy
  2. Detect, Locate, and Mitigate GPS Threats

    SBC: QUNAV LLC            Topic: A17119

    Phase I effort will develop an innovative Exploitation of Discrete GPS interference for Enhanced navigation (EDGE) technology. EDGE uses existing antenna configurations and RF front-ends on a missile platform (or similar platforms) to detect and locate GPS interferers (jammers and spoofers). Localized interference sources are then exploited for navigation, targeting, and guidance. Common approache ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Bone Conduction Audio & Vibrotactile Transducer for Dual-Use Communication

    SBC: Engineering Acoustics Incorporated            Topic: A16019

    Tactical situation awareness (SA) is critical for ensuring the Warfighters situational dominance, especially during combat. SA can improve security, survivability and optimize lethality. The object of this SBIR is to develop a dual-mode transducer (B-Tac) that provides both bone conduction (BC) sound transmission and vibrotactile cues. The merit of each technology alone has been shown to enhance p ...

    SBIR Phase II 2018 Department of DefenseArmy
  4. A Platform Agnostic Low SWaP-C Chirped LFMCW Radar for counter-UAS application

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: A17126

    This proposal presents A Platform Agnostic Low SWaP-C Chirped LFMCW Radar for counter-UAS application. The radar utilizes IFT’s unique gated radar structure to reduce transmission carrier leakage into the receiver channel and minimize the oscillator phase noise influence on the target signal. In addition, the digital signal processing provides high processing gain. These enable the radar to achi ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Software Based All Digital Wireless Modem

    SBC: FAST FIT TECHNOLOGIES LLC            Topic: A16113

    The research conducted on the all software digital COTS modem provides a new paradigm in the creation, manipulation, and processing of communication waveforms that removes the dependency on "purpose built" modem hardware for satellite, terrestrial, and airborne communications. The flexibility and adaptability of this new paradigm will result in an architecture to breath new life into old/antiquate ...

    SBIR Phase II 2018 Department of DefenseArmy
  6. Lightweight Bullet and Fragment Impact Protection for Mobile Missile Launcher

    SBC: AMERICAN TECHNICAL COATINGS, INC.            Topic: A17034

    Army mobile missile launchers are vulnerable to bullet and fragment impacts as current missile canisters are made of lightweight metals or composites that offer little ballistic protection. American Technical Coatings, Inc. (DBA ATC Materials, Inc.) of Westlake, OH is a leader in insensitive munitions armor technologies and has previously commercialized and fielded systems for IM protection. ATC†...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Capacitive removal of PFOA and PFOS from Drinking Water

    SBC: MAINSTREAM ENGINEERING CORP            Topic: 17NCER1A

    Polyfluoroalkyl and perfluoroalkyl compounds (PFCs) have been used commercially since the 1940’s due to their high level of chemical stability, almost frictionless surface or waterproofing characteristics. Elevated levels of PFCs have been linked to cancer and other health problems including reproductive and developmental risks. PFOA and PFOS are amongst the most prevalent of the PFCs with low l ...

    SBIR Phase I 2018 Environmental Protection Agency
  8. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  9. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  10. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
US Flag An Official Website of the United States Government