List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. An Enhanced Contact Plasma Reactor: A Competitive Remediation Technology for Per- and Perfluoroalkyl Substance (PFAS) Contaminated Water

    SBC: Dmax Plasma LLC            Topic: 17NCER1A

    Perfluoroalkyl substances (PFASs) have received considerable attention due to their toxicity, ubiquitous presence and recalcitrance. Manufacture and disposal of PFAS-containing products has resulted in PFAS contamination of numerous water supplies. Recent reports indicate the Air Force alone is expecting to spend > $2.25 billion for cleanup for PFAS-contaminated sites. Thus, there is a huge market ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Green Process for Plastic Chrome

    SBC: VERGASON TECHNOLOGY, INC.            Topic: 17NCER5B

    This green approach to manufacturing plastic with decorative chrome will eliminate health and environmental hazards from the chrome electroplating process. The US and global market for decorative chrome on plastic is 12 million m2/year and 84 million m2/year respectively, with 80% in automobile trim, 10% in appliances and 10% in sanitary fixtures. Without a viable commercial alternative, US provid ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Parameter Development for the Scaled Manufacturing of Mycelium Bound Panels for Commercial Interior Products

    SBC: ECOVATIVE DESIGN LLC            Topic: 16NCER6A

    Ecovative Design uses grown mycelium structures to bind agricultural and wood byproducts into inherently nontoxic_x000D_ products containing no added urea formaldehyde or flame-retardant chemicals. This research program focuses_x000D_ on maturing mycelium technology for use in the production of large scale board products, from low density (LD) particle board to acoustic panels and thermal insulati ...

    SBIR Phase II 2018 Environmental Protection Agency
  5. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Non-destructive characterization of transparent armor

    SBC: LUMETRICS, INC.            Topic: A17114

    DOD seeks an apparatus to characterize transparent armor non-destructively by determining the material and thickness of each constituent layer of the armor.Lumetrics has broad experience in measuring physical dimensions and optical properties of single and multi-layer structures.During Phase 1, Lumetrics proposes to develop a prototype benchtop instrument to measure a common set of spectral optica ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Advanced Direct Wideband Analog to Digital Conversion for Radar

    SBC: Helios Remote Sensing Systems, Inc.            Topic: A18029

    Helios Remote Sensing Systems proposes to develop and demonstrate a direct wideband (WB) analog-to-digital conversion (ADC) capability for all types of radar systems to improve performance capability and reduce costs.Helios will define and develop a concept for a Direct Wideband ADC Digital Down converter that meets the requirements of advanced radar systems.We will demonstrate the feasibility of ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Helmet-Mounted Microbolometer Hostile Fire Sensor

    SBC: Kitware, Inc.            Topic: A18042

    It is critical for soldiers and autonomous systems to quickly determine the origin of hostile fire events for well-informed and timely responses. However, there are capability gaps with current human-worn hostile-fire detection systems that rely on acoustics and muzzle flash. Kitware proposes PitViper, an autonomous helmet-mounted hostile-fire detection sensor system that tracks projectiles in fli ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government