You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: FRAMERGY INC            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    Legacy GPS receivers do not make use of the disciplined atomic oscillator flywheel output in GPS Disciplined Oscillator systems. The attached proposal shows how the disciplined oscillator signal can be used to improve GPS carrier and code tracking, mitigate multipath, jamming and spoofing, and to detect GPS receiver and satellite system anomalies. Using the disciplined oscillator as the frequency ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Small form-factor, Relocatable, Unattended Ground Sensor

    SBC: NEXTGEN FEDERAL SYSTEMS LLC            Topic: A18022

    Intelligent Multirotor Autonomous Glider for Relocatable Sensors (IMAGRS) is an innovative and highly capable micro Unmanned Aircraft System (UAS) that enables unattended multi-spectral imaging and processing. IMAGRS integrates existing technologies into a micro, hybrid, transforming UAS which acts autonomously as a relocatable imaging sensor. The hybrid design of IMAGRS will enable the platform t ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. High Bandwidth Redundant Communication Links for Small Satellites

    SBC: TETHERS UNLIMITED, INC.            Topic: A16079

    To satisfy the demand for increased data volumes from small satellite systems, TUI proposes to extend its existing modular SWIFT software-defined radio (SDR) platform to create a multi-band S-, X-, and Ka-band transceiver capable of closing SATCOM links in excess of 300 Mbps to smaller, tactically-placed ground stations. Key enabling technologies include the integration TUI’s existing three degr ...

    SBIR Phase II 2018 Department of DefenseArmy
  7. Tightly Coupled Oscillator and GPS Receiver

    SBC: Jackson Labs Technologies, Inc.            Topic: A17051

    GPS Disciplined Oscillator (GPSDO) systems traditionally combine the 1PPS output from a GPS receiver and highly stable clock like a Chip Scale Atomic Clock (CSAC) to steer the local clock frequency to match the frequency and phase of the GPS-generated 1PPS. However, the GPS receiver does not take advantage of the stable Chip Scale Atomic Clock for improved GPS receiver resilience, improved positio ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Non-Pyro Electric Small Arms Fire Simulator

    SBC: Digital Solid State Propulsion, Inc            Topic: A18091

    Digital Solid State Propulsion Inc. is proposing the development of a reusable electric blank system that leverages over 10 years of success in formulating, engineering, and manufacturing Electric Solid Propellants for the space, defense, and entertainment industries. DSSP already has a pyrotechnic solution to battlefield effects simulating small arms fire based on eSquib technology, however, for ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Optimized Process for Ultrasonic Consolidation of Metallic Composites

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: A12aT004

    The overall objective of the proposed effort is to develop an improved ultrasonic consolidation process for metal matrix composites (MMCs). This will be done through the development and validation of multiscale models of the bonding process and the laminated structures produced. These models will facilitate the optimization of the in-coming material, the structural performance of the processed m ...

    STTR Phase I 2012 Department of DefenseArmy
  10. Development of Low Temperature Ultracapacitor

    SBC: Yardney Technical Products, Inc.            Topic: A12aT010

    The objective of this Phase 1 effort is to develop an asymmetric supercapacitor (ASC) that provides>10 Wh/kg energy density and a high power density, and maintains this performance down to -55 degrees C. Yardney Technical Products (YTP), a recognized specialty high energy battery manufacturer in Pawcatuck, CT in collaboration with the Jet Propulsion Laboratory (JPL) proposes to design, develop and ...

    STTR Phase I 2012 Department of DefenseArmy
US Flag An Official Website of the United States Government