Award Data

Many injuries in the battlefield are being treated by non-medical personnel(e.g. 42% of tourniquet applications are applied by non-medical personnel). Unfortunately, most non-medical personnel are not provided with opportunities to practice medical skills in a high stress environment prior to completing them during live missions. This lack of practice of critical skills is related to a need to foc ...

To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

The presence of per- and polyfluoroalkyl substances (PFAS) in the environment represents an emerging issue due to their stability, bioaccumulation potential, and risks to human and ecological well-being. There is a critical need to develop sampling methods for PFAS to assess risks and inform remedial investigations and feasibility studies (RI/FS) at locations where historical releases have elevate ...

To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

The purpose of this proposal is to demonstrate the feasibility, through modeling and simulation, of integrating engineered polyhedral Phase Transforming Cellular Matrix (PXCM) materials as a dynamic, elastically deformable solution for non-pneumatic tires that can; 1) resist loss of mobility due to hazards that include ballistic/explosive threats, and road debris, 2) extend capability allowing the ...

The objective of this project is to develop a modular, open-architecture, physics-based ground vehicle mobility prediction software tool for world-wide terrains that are encountered in military applications including on-road and off-road soft soil terrains. The tool will integrate three modules: (1) Physics-Based Vehicle-Terrain Modeling tool; (2) Geographic Information System (GIS); and (3) Stoch ...

Currently available thermal cameras do not meet the combined weight, power, field-of-view (FOV), and detection requirements necessary for use on nano-UAVs for applications such as Soldier Borne Sensors (SBS). Increasing the angular FOV while maintaining a desired probability of detection under specified conditions typically means increasing pixel count. Once the detector technology is at the minim ...

Solvents are a valuable processing tool in the chemical and related industries. Solvent are used to enhance mass transfer, heat transfer and in most cases are a processing aid and eventually are not used in the final product but to enhance the fabrication of the final product. While solvents are very valuable, they also cause a significant problem with their volatility and associated emissions. ...

The US Army and Marines rely significantly on fossil-fuel based tactical power generation to provide electrical energy to deployed troops in small camps and forward operation bases. These generators are sized to support the expected maximum power but are often operated far below rated power due to the dynamic nature of electrical loads. On average, the generators are loaded less than 50% of the ...