List

In this SBIR effort we will develop a balanced detection analog photonic link consisting of a DFB laser, a dual-output high-speed, low-Vp mach-zehnder modulator (MZM) and a high-power, high-linearity balanced photodetector (BPD) using a dual-core, single mode, multicore fiber (MCF) that is supplied by our subcontractor, OFS. We will design, fabricate and characterize (phase I) the MZM and the BPD, ...

Photonic integration, and specifically silicon photonics, has emerged as one of the leading solutions for maintaining or improving the performance of optical systems while addressing the requirements related to size, weight, and power (SWaP). Photonic integrated circuits (PICs), which integrate multiple photonic elements onto a single chip, are specifically suited to providing the complexity and f ...

In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

The primary objective of this project is to improve the light extraction efficiency of large-format mid-wave infrared (MWIR) and long-wave infrared (LWIR) superlattice light emitting diode (SLED) arrays for infrared scene projector applications. While SLED technologies have shown great promise for scene projectors, their full potential has yet to be realized due to both electrical and optical inef ...

To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

The modern Military has an ever increasing need for power, in particular light weight portable power with high power densities and decreased deployed foot print.Currently packable panels are made from low efficiency light weight Amorphous Silicon or carbon fiber backed crystalline silicon.The weakness of the amorphous silicon technology resides in the power conversion efficiency (watts per unit ar ...

Future U.S. Army vehicles will require engines with low heat rejection, high power density, lower-friction (15 % reduction), reduced fuel consumption (2-5% lower), and higher durability. Our team, NanoCoatings, Inc. (NCI) and Southwest Research Institute (SwRI), will down-select the most promising coating technologies and coating materials for both piston-rings and cylinder-liners. Our preliminary ...

The focus of this STTR phase I component is on proof-of-concept studies demonstrating applicability of technical approaches for identificationof circulatory diagnostic markers for infectious disease. Therefore, the primary objective of this project is to determine feasibility of one suchtechnical approach called Proteomics-based Expression Library Screening (PELS), for identification of pathogen-d ...