List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Applying Passive Samplers to Assess Perfluoroalkylated Substances in Soils and Sediments

    SBC: Accurate Environmental LLC            Topic: 17NCER3A

    The presence of per- and polyfluoroalkyl substances (PFAS) in the environment represents an emerging issue due to their stability, bioaccumulation potential, and risks to human and ecological well-being. There is a critical need to develop sampling methods for PFAS to assess risks and inform remedial investigations and feasibility studies (RI/FS) at locations where historical releases have elevate ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Indoor Formaldehyde Detection by a Low-Cost Chemical Sensor Based on Organic Nanofibers

    SBC: Vaporsens, Inc.            Topic: 16NCER1A

    Need: People are exposed to formaldehyde, a carcinogen found in building materials. Highly sensitive, real-time formaldehyde sensors would improve human safety by alerting users to harmful concentrations. _x000D_ _x000D_ Technical Feasibility: Vaporsens produces chemical sensors based on novel organic nanofiber technology. Phase 1 results demonstrated high selectivity, rapid-response time, and dem ...

    SBIR Phase II 2018 Environmental Protection Agency
  4. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy
  5. Conductive Composites for Electro-Magnetic Interference Composite Rigid Wall Shelter (EMI CRWS)

    SBC: Conductive Composites Company, L.L.C.            Topic: N172103

    Rigid Wall Shelters (RWS) are an integral building block for Marine Corp operations and support a multitude of operational needs from maintenance and repair operations to command posts and medical operations. There are several key operational deficiencies with metal RWS, the weight of legacy systems and lack of insulation result in a high cost to transport and difficulty heating and cooling interi ...

    SBIR Phase I 2018 Department of DefenseNavy
  6. Applying Advanced Human Engineering Methods to Mission Planning for Multi-Manned or Unmanned Air Vehicles

    SBC: Monterey Technologies, Inc.            Topic: N141019

    The proposed Phase II.5 ViPER USMC large mission planning mission planning expansion effort seeks to add capabilities to ViPER-CVW that will provide an initial large force air planning capability to USMC aviation planners. Development will focus on providing route and airspace deconfliction tools which link airspace, flight routing, and planned aircraft movements, as well as automated checks to en ...

    SBIR Phase II 2018 Department of DefenseNavy
  7. WesTest Hardware Modeler for LASAR Digital Device Simulationcompatible with the VDATS Di-Series digital subsystem

    SBC: WESTEST ENGINEERING CORPORATION            Topic: AF172005

    Many custom and hybrid integrated circuits (ICs) and custom electronic components cannot bemodeled in simulation software because of their complexity and/or lack of technical data.TPS developers need to use a hardware modeler for these types of integrated circuits.The proposed WesTest Hardware Modeler will be compatible with LASAR and the VDATS Di-Series digital subsystem.It utilizes the Teradyne ...

    SBIR Phase I 2018 Department of DefenseAir Force
  8. Landing Gear Fatigue Model K Modification

    SBC: Select Engineering Services            Topic: AF161018

    Air Force landing gear systems are subjected to surface treatment processes (e.g., chrome plating, cadmium plating, anodizing) an indefinite number of times throughout their service life. During these processes, components are exposed to environments and chemicals which affect material surface conditions (e.g., roughness, residual stresses, microstructure) and reduce fatigue life. This reduction i ...

    SBIR Phase II 2018 Department of DefenseAir Force
  9. Network Enabled Medical Training (NetEMT) Toolkit

    SBC: QUANTIFIED DESIGN SOLUTIONS, LLC            Topic: A17101

    Many injuries in the battlefield are being treated by non-medical personnel(e.g. 42% of tourniquet applications are applied by non-medical personnel). Unfortunately, most non-medical personnel are not provided with opportunities to practice medical skills in a high stress environment prior to completing them during live missions. This lack of practice of critical skills is related to a need to foc ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. High Performance Actuators for Solid Propulsion Control Systems

    SBC: Electric Drivetrain Technologies LLC            Topic: MDA16010

    The Missile Defense Agency seek solid propellant, propulsion control systems with longer operation times, increased performance, and reduced size, weight, power, and cost.Solid propellant exhaust gases are commonly 2,000-4,000F.Proportionally controlled actuators that are capable of enduring higher temperatures while aiming to maintain performance and/or reduce SWaP-C will improve the robustness o ...

    SBIR Phase II 2018 Department of DefenseMissile Defense Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government