You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
GaP ZnS for Blue Light Emitting Diodes
SBC: ASTROPOWER, INC. Topic: N/AAstroPower is developing a two-junction monolithic tandem solar cell composed of (AlxGa1-x)0.51In.49P lattice matched to GaAs for use as the top cell in a three-junction, two-terminal tandem stack. This tunable bandgap material system is capable of current matching, at 2.03eV, in a two-junction monolithic tandem solar cell two terminal design of (AlxGa1-x)0.51In0.49P/GaAs yielding a best case pred ...
SBIR Phase II 1993 Department of DefenseMissile Defense Agency -
LIGHTWEIGHT, LIGHT-TRAPPED, THIN GAAS SOLAR CELL FOR SPACECRAFT APPLICATIONS
SBC: ASTROPOWER, INC. Topic: N/AASTROPOWER IS PROPOSING THE DEVELOPMENT OF AN ULTRA-LIGHTWEIGHT, HIGH PERFORMANCE, THIN LIGHT TRAPPING GAAS SOLAR CELL FOR ADVANCED SPACE POWER SYSTEMS. A THIN DEVICE LEADS TO HIGHER PERFORMANCE IN TERMS OF OPEN CIRCUIT VOLTAGE, RADIATION RESISTANCE, AND SPECIFIC POWER. IN A THIN DEVICE, THE INCORPORATION OF LIGHT TRAPPING TO EXTEND THE OPTICAL PATH LENGTH PERMITS GREATER CURRENT GENERATIC THAN CA ...
SBIR Phase II 1993 Department of DefenseAir Force -
High Specific Power, Electrostatically Bonded, Ultra-thin Gaas
SBC: ASTROPOWER, INC. Topic: N/AASTROPOWER PROPOSES TO DEVELOP A LIGHTWEIGHT, HIGH PERFORMANCE, ULTRA-THIN ELECTROSTATICALLY BONDED GaAs SOLAR CELL WITH COPLANAR BACK CONTACTS. THE INNOVATIVE DESIGN INCORPORATES LIGHT TRAPPING, ADHESIVELESS COVER SLIDE BONDING, AND ELIMINATES GRID SHADING. THIS NOVEL DEVICE WILL EXHIBIT INCREASED EFFICIENCY AND SPECIFIC POWER DUE TO THE HIGHER OPEN CIRCUIT VOLTAGE AND SHORT CIRCUIT CURRENT OBTAI ...
SBIR Phase I 1993 Department of DefenseMissile Defense Agency -
Monolithically Interconnected, Thin Silicon Solar Cell Array
SBC: ASTROPOWER, INC. Topic: N/AN/A
SBIR Phase I 1993 Department of DefenseMissile Defense Agency -
REMOVAL OF VOLATILE ORGANIC COMPOUNDS FROM GASEOUS EFFLUENT STREAMS BY NOVEL PERFLUOROMEMBRANES
SBC: COMPACT MEMBRANE SYSTEMS, INC. Topic: N/AN/A
SBIR Phase I 1993 Environmental Protection Agency -
NOVEL CERAMIC/METAL COMPOSITES FOR ARMOR APPLICATIONS
SBC: Lanxide Corporation Topic: N/ACERAMICS HAVE BEEN SHOWN TO BE VERY EFFECTIVE IN THE DEFEAT OF A WIDE RANGE OF KINETIC ENERGY (KE) THREATS. HOWEVER, THE USE OF CERAMICS IN ARMORED VEHICLES HAS BEEN LIMITED DUE IN MOST PART TO THEIR HIGH COST. CERAMIC PARTICULATE REINFORCED METAL MATRIX COMPOSITES (MMCS) PRODUCED BY PRESSURELESS LIQUID METAL INFILTRATION ARE INEXPENSIVE RELATIVE TO MONOLITHIC CERAMICS DUE TO THE LOWER COST OF THE ...
SBIR Phase II 1993 Department of DefenseDefense Advanced Research Projects Agency -
Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems
SBC: EM PHOTONICS INC Topic: N172102Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...
SBIR Phase I 2018 Department of DefenseNavy -
Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray
SBC: VRC Metal Systems, LLC Topic: A16AT002The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Army’s ne ...
STTR Phase II 2018 Department of DefenseArmy -
Hyperspectral Microwave Photonic Radiometer
SBC: PHASE SENSITIVE INNOVATIONS INC Topic: S1Passive Microwave Remote Sensing is currently utilized by NASA, NOAA, and others to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. These sensors could also be used in upcoming missions such as Saturn’s moon to study atmospheric makeup. On earth, humidity and temperature sounding is conducted near several absorption lines to determine k ...
SBIR Phase I 2018 National Aeronautics and Space Administration -
Radiation-Hardened CubeSat Power Management & Distribution (PMAD) for Europa Environment
SBC: RAGNAROK INDUSTRIES INC Topic: S4In Phase 1, Ragnarok will mature the much-needed rad-hard BCDR technology from TRL 3 - 4. Phase 2 of Ragnarok’s efforts will proceed to develop the entire functional prototype radiation-hardened PMAD system including the newly developed BCDR hardware from Phase 1. Phase 2 efforts will conclude with a full Critical Design Review (CDR) and a completed and closed list of HRs and HRMPs. The final pr ...
SBIR Phase I 2018 National Aeronautics and Space Administration