You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy
  2. Advanced Heat Spreader Technology for Gallium Nitride (GaN) Monolithic Microwave Integrated Circuits (MMICs)

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: N161052

    Electrical systems are being designed with ever increasing power densities, particularly future radar and electronic warfare systems built with Gallium Nitride on Silicon Carbide Monolithic Integrated Circuits (GaN MMICs). Today’s GaN MMICs use solid metal, low-coefficient of thermal expansion heat spreaders (e.g., Copper-Tungsten). But solid-state heat spreaders cannot meet the size, weight, po ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: A16AT002

    The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Army’s ne ...

    STTR Phase II 2018 Department of DefenseArmy
  4. Advanced IM Compliant Dual-Mode Energetic System

    SBC: Systima Technologies, Inc.            Topic: AF173012

    Systima Technologies, Inc. in collaboration with Aerojet Rocketdyne is proposing to develop and demonstrate a dual mode energetic system design that incorporates an advanced energetic formulation, technology for burn-rate control, and features for IM compliance and system performance enhancement (lethality).The Phase I program includes development and refinement of the system design concepts, comp ...

    SBIR Phase I 2018 Department of DefenseAir Force
  5. Reconstruction Algorithms for High-Energy Computed Tomography Images of Rocket Motors

    SBC: LICKENBROCK TECHNOLOGIES, INC.            Topic: AF121187

    In the Phases I and II of this SBIR project, a software product was developed, delivered and deployed at the Hill AFB CT facility for highly resolving computed tomography of aerospace components.The project was focused upon speed of execution using high-performance computer architectures.In this commercialization readiness program, the technology will be advanced to at least TRL 6 by the following ...

    SBIR Phase II 2018 Department of DefenseAir Force
  6. Hypersonic Data Recovery

    SBC: Systima Technologies, Inc.            Topic: AF151180

    Systima Technologies, Inc. proposes the development of an unmanned hypersonic test vehicle recovery system that will greatly enhance the effectiveness of hypersonic flight testing. Systima plans to perform a comprehensive review of the various hypersonic vehicle test environments and recovery requirements in order to develop recommendations for suitable vehicle recovery technologies for the range ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Frequency-Equalized Lithiumk Niobate Phase Modulator

    SBC: EOSPACE INC.            Topic: N173146

    Develop frequency-equalized Electro-Optic lithium niobate phase modulators with flat frequency response, low switching voltage-length product, and multi-decade environmental lifetime for use in strategic-grade high-precision inertial sensors.     New innovative approaches to improve phase modulator performance will be investigated and test structures fabricated to verify the new device concep ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Modular Infrared Time-delay Integrated Systems

    SBC: Systima Technologies, Inc.            Topic: N181014

    Systima is proposing the development of an integrated modular flare dispenser system capable of delivering multiple discrete busts of pyrophoric flare material through the dispense of a single unit from an AN/ALE-47 dispenser. The Phase I program will conduct significant static ground testing to enable a higher TRL level at the start of the Phase II program. This approach will retire risk early an ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. Precision Machining of Composite with Waterjets

    SBC: Ormond, LLC            Topic: N181028

    Waterjets are widely used to cut and trim composites and techniques have been developed to trepan and pierce materials without causing delamination or fiber break-out on the exit side. However, using waterjets to mill countersunk holes has not been demonstrated before. This project will use a patented waterjet milling process to show that waterjets can successfully mill countersunk holes in compos ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Development and Validation of an Advanced Simulation Tool for the Evaluation of Aerial Refueling Events

    SBC: SDI Engineering Inc            Topic: N092111

    SDI Engineering Inc. (SDI) will develop validated software tools for hose and drogue aerial refueling operations. This will result in a modeling, simulation and analysis capability that can be used to address issues related to aerial refueling operations. SDI has working software that was previously developed for the analysis of the refueling hose, reeling mechanism and probe. SDI’s software wil ...

    SBIR Phase II 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government