You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Image Enhancement and Machine Learning for Improving Man-Portable Targeting Systems

    SBC: EM PHOTONICS INC            Topic: N172102

    Modern DoD applications are benefiting from the proliferation of EO/IR sensor technology. As imagers become cheaper and smaller, they are being more widely deployed for a variety of scenarios. This trend is exemplified by the Navys Future Targeting System (FTS), which will provide laser designation, laser spot imaging, and some target location functions in a single 5.5-pound unit, replacing discre ...

    SBIR Phase I 2018 Department of DefenseNavy
  2. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY INC            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  4. Solid State Additive Manufacturing of Titanium Alloys Using Cold Spray

    SBC: VRC Metal Systems, LLC            Topic: A16AT002

    The US Army needs a method for large scale repair and additive manufacture of Ti-6Al-4V components in support of its light weighting initiative. Cold spray metal deposition technology is a solid-state bonding technique where supersonic powdered metal is deposited on a metallic substrate through adiabatic shearing processes at low temperature. Cold spray offers an ideal solution for the Army’s ne ...

    STTR Phase II 2018 Department of DefenseArmy
  5. Developing Aluminum-Based Metallic Glass Alloys for use in the Additive Manufacture of High-Toughness Aerospace Components

    SBC: NANOAL LLC            Topic: AF173014

    The additive manufacture of metal components from powder feedstocki.e. the net-shape, three-dimensional forming of a component, layer by layer, from a computer filehas gained popularity in the last nearly three decades, evolving from a method of rapid prototyping to rapid manufacturing. These methods are inherently far-from-equilibrium and present a significant, economical method to fabricate bulk ...

    SBIR Phase I 2018 Department of DefenseAir Force
  6. Certification Modeling for Composites with Voids and Wrinkles for Engines and Structures

    SBC: ADVANCED COMPUTATIONAL TECHNOLOGY, LLC            Topic: AF161129

    This proposal aims at developing a material agnostic modeling and analysis capability to help understand the genesis of voids and wrinkles during the processing and curing of fibrous composites. It also develops a hierarchical framework to investigate the effects of these micromechanics defects on the interlaminar strength and fatigue life of curved composite structures. The overall effort is cate ...

    SBIR Phase II 2018 Department of DefenseAir Force
  7. Surface Haptic Technology for Geospatial Display

    SBC: Tanvas, Inc.            Topic: A15049

    The goal of this development effort is to provide warfighters with inexpensive methods to view geospatial intelligence information on a hand-held tablet through their sense of touch. This allows eyes-free and silent operation without generating light. This proposal deals with two surface haptic display technologies. Variable-friction displays create haptic effects by varying the coefficient of fri ...

    SBIR Phase II 2018 Department of DefenseArmy
  8. Colloidal Quantum Dots for Cost Reduction in EO/IR Detectors for Infrared Imaging

    SBC: EPISENSORS INC            Topic: A17029

    Technical Abstract (200 word limit): While state-of-the-art microbolometers demonstrate impressive capabilities for low-cost uncooled long-wavelength infrared (LWIR) imaging, there is currently a need for low-cost, mid-wavelength infrared (MWIR) imaging systems capable of high performance with fast frame rates at high operating temperatures. HgTe colloidal quantum dot (CQD) focal plane arrays (FPA ...

    SBIR Phase II 2018 Department of DefenseArmy
  9. Lethality Impact Maritime Analysis (LIMA) Toolset

    SBC: ILLINOISROCSTAR LLC            Topic: N181008

    The objective of the proposed project is to formulate, design and implement the Lethal Impact Maritime Analysis (LIMA) toolset. LIMA brings the latest modeling and simulation technology into vulnerability and lethality (V/L) assessment for maritime structures to serve US NAVY needs. LIMA comes with an intuitive graphical user interface enabled by fault-tree and stochastic analysis modules, a param ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Enhanced Clamp Cushion (ECC)

    SBC: HY-TEK MANUFACTURING CO., INC.            Topic: N181021

    HMC has chosen to employ a two-pronged approach to our ECC research and development efforts. The first approach involves research and identification of hybrid elastomeric compounds that can be engineered for long-term stability in the difficult mechanical and environmental conditions required for this application. The first path in this effort Includes research and development of fabric based hybr ...

    SBIR Phase I 2018 Department of DefenseNavy
US Flag An Official Website of the United States Government