Award Data

In this SBIR effort we will collaborate with Dr. J.C. Campbell’s research group at the University of Virginia (UVA) in developing a high-power, high-speed, high-linearity photodiode (PD) receiver optimized for operation at 1 micron wavelength. In phase II, we will fabricate, characterize, package and commercialize the 1 micron photodiode that we have successfully designed and studied in our phas ...

To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logisticalsystem requires natural gas gathering lines, processing facilities,product storage tanks and Jots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermitte ...

Passive Microwave Remote Sensing is currently utilized by AFRL, NASA, NOAA, and others to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. Soundings of the atmosphere are conducted near several oxygen and water absorption lines at frequencies of ~20-200 GHz to determine key parameters of the atmospheric state, including temperature and humi ...

Based on the results of Phase I, we aim to develop a prototype of the high speed dynamic IRSP instrument. This prototype will incorporate the next generation 1Kx1K IRLED array that is compatible with the highly successful and user-tested NSLEDS IRSP. If Phase II of the proposed project is successful, the result will be an upgrade of NSLEDS IRSP system to higher performance and operability. The rea ...

This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR)camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally occ ...

Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the micron range. The metal electrodes are typically sputter coated onto the substrate, using lithographic ...

To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

Accurate and timely weather information for situational awareness is critical to the success of Air Force missions. To date, space-borne sensors for weather forecasting primarily include visible, infrared, and microwave instruments. While visible and infrared sensors have reached a high level of maturity and performance, those operating in the microwave region of the electromagnetic spectrum conti ...

We propose an innovative hybrid composite material containing shear thickening fluid (STF) Energy Absorbing Layers (SEALs) that provides superior impact protection and novel, self-healing functionality to prevent leakage after impact. The proposed innovation directly addresses the need for thin, lightweight, impact-resistant composite materials that can be fabricated in complex geometries for nex ...

Composites Automation LLC (CA), our academic partner University of Delaware – Center for Composite Materials (UD-CCM) are teaming up in this STTR Phase II project to evaluate automated tape placement (ATP) processing of thin-ply composites, including material and process development, creation of a modeling foundation capturing thin-ply placement, test panel fabrication and mechanical performance ...