You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High Temperature Wear Coatings for Improving High Output Military Diesel Engine Performance and Durability

    SBC: Commodo Materials, LLC            Topic: A18099

    Future military combat engines require high power density, low heat rejection designs like the Achates Opposed-Piston Diesel. This design places higher tribological performance requirements on the piston/ring/bore. Various coatings have been tried on piston skirts but durability of the cylinder kit remains a challenge due to heat, high side loads, bore distortions from ports, and marginal lubricat ...

    SBIR Phase I 2018 Department of DefenseArmy
  2. Rapid, Transient, CFD-Based Solver for Human and Vehicle Thermal Signature Prediction

    SBC: Thermoanalytics, Inc.            Topic: A18102

    The efficient design and evaluation of Army vehicles requires accurate simulation of the factors that affect the vehicle’s infrared signature and thermal conditions inside the vehicle. The model must account for all the transient heat transfer within the vehicle, including heat from the engine, air flow within the engine compartment, exhaust system, humidity transport and ventilation inside the ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Intelligent System Architecture for Autonomous Care (ISAAC) Diagnosis

    SBC: Soar Technology, Inc.            Topic: A18063

    Unmanned systems and autonomous capabilities provide an avenue for improving enroute care in situations where medical evacuation assets are either not available or unable to reach the patient. A first step is to explore how intelligent algorithms can be used to supplement the current capabilities by improving the diagnosis, intervention, and monitoring of combat trauma care. Variability in the sen ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Dynamic Collaborative Visualization Ecosystem (DynaCoVE)

    SBC: Oceanit Laboratories, Inc.            Topic: A18032

    Oceanit proposes to develop visual analytics tool to support collaborative decision making with high-dimensional variables using 2D, 2 1/2D, and 3D visualization with interaction for demonstration.

    SBIR Phase I 2018 Department of DefenseArmy
  5. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Preview Sensing Suspension

    SBC: Pratt & Miller Engineering & Fabrication, Inc.            Topic: A18098

    The PASS system is an innovative mobility subsystem that combines a terrain preview sensor suite, a processor and simultaneous localization and mapping (SLAM) algorithm, and semi-active or active suspension into a single system that is capable of viewing the terrain ahead of the vehicle, determining the best suspension capabilities for the vehicle to cross that terrain, and then modifying the susp ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. In Vehicle Adjustable Torsion Bar Technologies

    SBC: GS ENGINEERING, INC.            Topic: A17146

    In order to provide a best of both world solution to the Army which provides the simplicity, reliability and cost effectiveness of a torsion bar suspension system with the flexibility and adjustment of a more costly and complex HSU system, GS Engineering will develop an in-vehicle torsion bar adjustment device. Leveraging decades of military tracked vehicle suspension expertise and starting with t ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  9. Feasibility of rPET Lignin-Content Polylols for Significant Reduction of Halogenated Flame Retardant in Construction Spray Foam

    SBC: Resinate Materials Group, Inc.            Topic: 17NCER6A

    This EPA SBIR Phase I Research and Development proposal will demonstrate feasibility of reduction in halogenated flame retardant use in polyisocyanurate foams prepared from lignincontent rPET polyols. The study will show whether or not the lignin rPET polyol formulations meet ASTM flame retardancy standards and thus reduce or eliminate the need for halogenated fire retardants (HFRs) in spray foams ...

    SBIR Phase I 2018 Environmental Protection Agency
  10. High Voltage Wide-Bandgap Motor Controller

    SBC: GLOBAL EMBEDDED TECHNOLOGIES, INC            Topic: A18100

    On military vehicles, high voltage components will reduce space, weight and cooling, improve fuel efficiency, optimize vehicle performance, and increase defense and mission capabilities.Advanced high voltage electrical loads are being created and the electrification of loads allows for the removal of constant mechanical drag on the engine, an increase in efficiency and capability through variable ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government