You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. Flexible Conformal Ultrasound Arrays for Imaging and Modulation

    SBC: PRIXARC, LLC            Topic: SB173001

    This project will address the need for reliable and robust wearable ultrasound system for both imaging and modulation in challenging environments such as ambulances, emergency rooms, battlefields, and industrial facilities by using the concept of autonomy. Specifically, we will develop autonomous wearable systems that integrate ultrasound imaging and modulation subsystems within a single cognitive ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  2. Flying Missile Rail and High-Rate Production

    SBC: Cornerstone Research Group, Incorporated            Topic: SB173005

    CRG proposes to leverage its partnerships, advanced aerospace system design capabilities, and unique manufacturing technologies to design, build and demonstrate a flying missile rail along with the high-rate production technologies required to meet DARPAs objectives of 500 units per month, within one month.CRG will focus on high-rate manufacturing technologies currently in use within the automotiv ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  3. InSite: Targeted Training Content Management

    SBC: Tier 1 Performance Solutions, LLC            Topic: A18092

    To respond to ever-evolving enemy tactics, realistic, effective training is needed in the operational environment. The Army has, and is currently developing, numerous computer-based resources to support scenario-based training at the point of need. To support the personnel who use these training systems, a content management system is needed. Further, recommendations for training, and adaptively c ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Improved method for High Strength Magnesium Alloys in the as-cast Condition

    SBC: Terves Inc.            Topic: A18031

    Due to their low density and high specific properties, Magnesium alloys are often considered for applications in which weight savings are an important selection factor. There are however, some significant challenges to widespread application of magnesium alloys. Despite these potential opportunities, the use of as-cast magnesium alloys is still hampered by their lower strengths in the as cast desp ...

    SBIR Phase I 2018 Department of DefenseArmy
  5. Large Fill Factor, High Aspect Ratio Dual Band Superlattice Detectors and Focal Plane Arrays

    SBC: SK Infrared, LLC            Topic: A18039

    We propose the development of an improved fabrication process for the mid-wave and long-wave infrared (MWIR, LWIR) focal plane arrays (FPA) based on nBn, InAs/InAsSb, Type II Superlattice (T2SL) structures. The Phase I effort will demonstrate an etch process to achieve a trench with large depth (at least 10 µm), high aspect ratio (trench widths below 4 µm), and V-shaped sidewalls. This etch proc ...

    SBIR Phase I 2018 Department of DefenseArmy
  6. Biomolecule concentration and preservation by hydrogel driven forward osmosis for improved serological detection

    SBC: Guild Associates, Inc.            Topic: A17131

    A rapid and accurate diagnosis of infectious diseases is essential to reducing lost duty days for U.S. Service Members and accurately tracking outbreaks. Patient samples frequently require cold storage during transport to a centralized diagnostic laboratory. During transport antigens and antibodies may be degraded by proteases present in specimen sample matrices and lead to a false-negative diagno ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Scalable, Power Efficient, Programmable, Wide Dynamic Range, Multi-Field- Programmable-Array Compatible Readout Integrated Circuit for Infrared Range Applications

    SBC: SenseICs Ltd.            Topic: A18018

    We propose an innovative concept to develop a novel, next generation, readout integrated circuit (ROIC) architecture to be used for Infrared (IR) High Dynamic Range (HDR) applications. The HDR ROIC will provide a reconfigurable readout architecture using a column adjustable per-pixel gain selection to allow on-the-fly wide dynamic range capability with column-parallel analog to digital converters ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Novel Electrochemical Sensor for the Determination of JP-8 Fuel Additives

    SBC: Faraday Technology, Inc.            Topic: A18097

    The steady decline in JP-8 fuel suppliers and consequent cost increase results in increased costs and fuel shortages for the US government.Conversion to civilian aviation fuels with additives represents savings in terms of fuel costs as well as simplified infrastructure and reduced costs associated with distribution and storage of JP-8, which requires segregation from other fuels.This proposal res ...

    SBIR Phase I 2018 Department of DefenseArmy
US Flag An Official Website of the United States Government