List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Replacements for PVC and PE Water Pipes

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER1C

    METSS proposes to design a novel polymer system based on polypropylene with covalently attached antioxidants to mitigate issues with chemical permeation and water quality with current waterpipe materials. Polypropylene was selected as it has inherently good physical properties and low permeability that will limit chemical migration from the outside, addressing one critical factor impacting water q ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  3. Decontamination of Category A Viruses on Porous Surfaces and Sensitive Equipment

    SBC: MATERIALS ENGINEERING AND TECHNICAL SUPPORT SERVICES CORP.            Topic: 17NCER4A

    METSS will demonstrate the feasibility of utilizing two separate technologies, chlorine dioxide (ClO2) and Hot Air Decontamination (HAD; high temperature/low humidity) as on-site decontamination processes for treating_x000D_ Category A virus contaminated items including porous materials (e.g., upholstery, bedding, fabric, carpet, unpainted wood); sensitive equipment; and potentially reusable mater ...

    SBIR Phase I 2018 Environmental Protection Agency
  4. Flying Missile Rail and High-Rate Production

    SBC: Cornerstone Research Group, Incorporated            Topic: SB173005

    CRG proposes to leverage its partnerships, advanced aerospace system design capabilities, and unique manufacturing technologies to design, build and demonstrate a flying missile rail along with the high-rate production technologies required to meet DARPAs objectives of 500 units per month, within one month.CRG will focus on high-rate manufacturing technologies currently in use within the automotiv ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  5. Flexible Conformal Ultrasound Arrays for Imaging and Modulation

    SBC: PRIXARC, LLC            Topic: SB173001

    This project will address the need for reliable and robust wearable ultrasound system for both imaging and modulation in challenging environments such as ambulances, emergency rooms, battlefields, and industrial facilities by using the concept of autonomy. Specifically, we will develop autonomous wearable systems that integrate ultrasound imaging and modulation subsystems within a single cognitive ...

    SBIR Phase I 2018 Department of DefenseDefense Advanced Research Projects Agency
  6. Graphene-Enabled Long-Cycle-Life Lithium-Sulfur Batteries without Excess Lithium and Electrolyte

    SBC: Nanotek Instruments, Inc.            Topic: A17050

    This proposal seeks to advance the next generation of portable energy storage by exploiting the high specific energy intrinsic to the Li-S system. While sulfurs low electrical conductivity and the inhibiting effects of polysulfide dissolution have historically impeded the commercialization of Li-S batteries, we propose to overcome these limitations via the utilization of graphene as a multifunctio ...

    SBIR Phase I 2018 Department of DefenseArmy
  7. Advanced Lithium Sulfur Battery

    SBC: Cornerstone Research Group, Incorporated            Topic: A17050

    As tactical and deployed electrical power demands increase for soldiers, there is a commensurate need to increase the energy density of military batteries (i.e. man portable power) to ease the weight burden additional power capacity entails. Lithium-sulfur batteries, as replacement for current lithium ion batteries, are a promising advancement with theoretical specific energy of 2600Wh/kg and demo ...

    SBIR Phase I 2018 Department of DefenseArmy
  8. Non-toxic Hydrophobic Coatings for Improved Infrared and Red Phosphorus Obscurant Performance

    SBC: Powdermet, Inc.            Topic: A17057

    Powdermet proposes a program for the development of two hydrophobic coating processes to powders using its expertise in fluid bed chemical vapor deposition (FB-CVD).The coating by CVD of these polymers is already a well-established practice, but new to use in fluid bed particle coating, so the transition is perceived as low risk.The coated particles will then be analyzed and evaluated for their ab ...

    SBIR Phase I 2018 Department of DefenseArmy
  9. Unmanned CASEVAC Movement and Maneuver Controls

    SBC: Cornerstone Research Group, Incorporated            Topic: A17066

    Rapid patient evacuation is critical to minimize injury or save the life of the warfighter. Unmanned air and ground vehicles (UAV/UGV) provide a solution to enable quick casualty evacuation (CASEVAC) leveraging multi-purpose vehicles such as cargo transport. However, unmanned systems were typically not designed for human transport and may potentially create physiological stresses that exceed that ...

    SBIR Phase I 2018 Department of DefenseArmy
  10. Measurement of Force in Personnel Parachute Risers

    SBC: D'Angelo Technologies, LLC            Topic: A17127

    Parachute designers and manufacturers have long sought to obtain force data exerted on parachute risers during the various stages of deployment and flight. This data can provide valuable insight to help evaluate service life, new parachute development, and aid in computer modeling of parachute systems. Current techniques for measuring riser force require significant modification of the risers by t ...

    SBIR Phase I 2018 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government