Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: Phase Sensitive Innovations, Inc.            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...

    SBIR Phase I 2018 Department of DefenseArmy
  3. Additive Manufacturing for RF Materials and Antennas

    SBC: DeLUX Engineering, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase I 2018 Department of DefenseArmy
  4. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: DeLUX Engineering, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the 5-500 m range. The metal electrodes are typically sputter coated onto the substrate, using lithogra ...

    STTR Phase I 2017 Department of DefenseArmy
  5. Low Voltage Power Sources for Long-Life Electronics

    SBC: TalosTech LLC            Topic: SB163009

    There is a critical need for DoD to develop power sources that will increase the mission lifetime for unattended sensors and sensor radio networks. In order to take advantage of recent advances in extremely low power subthreshold circuits to greatly exte...

    SBIR Phase I 2017 Department of DefenseDefense Advanced Research Projects Agency
  6. Fouling-Resistant Ultrafiltration Membranes for Treatment of Oily Bilge Water

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    There is a recognized need for more effective and economical treatment processes for oily bilge waters. Direct filtration through currently available ultrafiltration (UF) membranes is a mechanically simple process that can provide excellent effluent quality. A limitation to more extensive use of this technology is the tendency of the hydrophilic membranes currently used to foul in the presence of ...

    SBIR Phase I 2002 Environmental Protection Agency
  7. Membranes for Air Venting and Retaining VOCs in Gasoline Storage Tanks

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Fugitive emissions of volatile organic compounds (VOCs) from gasoline marketing facilities continues to be an energy, safety, and environmental issue. Beginning in model year 2000, all vehicles are required to have an onboard refueling vapor recovery (ORVR) system, which will increase fugitive emissions from refueling stations because of the interface between ORVR vehicles and gasoline station und ...

    SBIR Phase I 2002 Environmental Protection Agency
  8. Retrofitting Diesel Electrical Generators for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Diesel generator sets (gen-sets) are used routinely to supply electrical power. Hospitals, businesses, and small communities use gen-sets to help reduce costs by load leveling and provide emergency power during blackouts (either scheduled or unscheduled). Recent power outages in California have led to large increases in the purchase of gen-sets, primarily for providing emergency power. In addition ...

    SBIR Phase I 2002 Environmental Protection Agency
  9. Enhanced VOC Oxidation

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Volatile organic compounds (VOCs) continue to be major air pollutants. Existing technologies (e.g., thermal oxidation, catalytic oxidation) are costly processes that limit their commercial viability. Compact Membrane Systems, Inc. (CMS) proposes a novel enhanced VOC oxidation process. CMS' novel oxidation technique should require less maintenance, consume less fuel, and reduce NOx emissions compar ...

    SBIR Phase I 2002 Environmental Protection Agency
  10. Retrofitting Diesel Electrical Generators for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 2002 Environmental Protection Agency
US Flag An Official Website of the United States Government