You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Multi-material Additive Manufacturing of RF Electronics
SBC: Delux Advanced Manufacturing, LLC Topic: A16006To reduce size, weight, power and cost (SWaP-c) military platforms have been evolving towards a more integrated design approach that efficiently utilizes all available space.To accommodate limited space constraints many commercial off-the-shelf (COTS) systems will need to be replaced by custom designed and fabricated components.For the case of radiofrequency (RF) electronic systems this will requi ...
SBIR Phase I 2016 Department of DefenseArmy -
Multimodal Non- destructive Evaluation of Internal Surfaces of Holes in Steel Structures
SBC: ALPHASENSE, INC. Topic: A16012A bore evacuator is generally used in gun barrel of armored fighting vehicles to help prevent poisonous propellant gases from venting back into the fighting compartment. It consists of a ring of holes drilled into the barrel, surrounded by a cylindrical pressure reservoir. Under typical operating conditions, pitting corrosions and stress corrosion cracks can form in the inner walls of those drille ...
SBIR Phase I 2016 Department of DefenseArmy -
Drone-Based Gas Mapping LiDAR for Leak Mitigation
SBC: Bridger Photonics, Inc. Topic: 17NCER2CBridger Photonics, Inc. proposes developing a drone-based Gas Mapping LiDAR™ sensor to mitigate the loss of valuable product across the Oil & Gas supply chain.The sensor will uncover leaks and physical changes to infrastructure and pipeline right-of-ways using high-resolution 3D topographical imagery with methane gas concentration overlays.The technology will enable reliable detection, precise l ...
SBIR Phase I 2018 Environmental Protection Agency -
A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector
SBC: FRAMERGY INC Topic: 17NCER2CTo reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...
SBIR Phase I 2018 Environmental Protection Agency -
Additive Manufacturing for RF Materials and Antennas
SBC: Delux Advanced Manufacturing, LLC Topic: A18020To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...
SBIR Phase I 2018 Department of DefenseArmy -
Low-cost Imager for Heavily Degraded Visual Environments
SBC: PHASE SENSITIVE INNOVATIONS INC Topic: A18040This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR) camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally oc ...
SBIR Phase I 2018 Department of DefenseArmy