List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  2. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Ultra-Thin Ply Formable Material from Reusable Short Carbon Fiber Composites

    SBC: Composites Automation LLC            Topic: T12

    This project develops an ultra-thin and formable prepreg material from reusable short carbon fiber composites (CFC), including process and material development, test panel fabrication and mechanical performance evaluation. Key to superior performance of ultra-thin ply materials is the ability to fabricate high fiber volume and uniform fiber distribution prepreg with low void content and layer thic ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. In-Situ Electrospray Capture of Organic Bearing Particulates from Comets and Celestial Bodies

    SBC: Connecticut Analytical Corporation            Topic: S1

    NASA has need for technologies that can enable sampling from asteroids and from depth in a comet nucleus, improved in-situ analysis of comets. It has been identified that there is also a requirement for improved dust environment measurements & particle analysis, small body resource identification, and/or quantification of potential small body resources (e.g., oxygen, water and other volatiles, ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. In-Situ Electrospray Capture of Organic Bearing Particulates from Alien Water Fountains

    SBC: Connecticut Analytical Corporation            Topic: S4

    NASA has need for technologies that can enable sampling from water jets, such as those observed emanating from the moon Enceladus and from the moon Europa. We propose to leverage past observations of the ability of electrospray ionization to capture and concentrate polar or polarizable trace species without damage, and combine that knowledge with recent discoveries in developing a hypervelocity ic ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Hyperspectral Microwave Photonic Radiometer

    SBC: Phase Sensitive Innovations, Inc.            Topic: S1

    Passive Microwave Remote Sensing is currently utilized by NASA, NOAA, and others to conduct Earth Science missions, including weather forecasting, early warning systems, and climate studies. These sensors could also be used in upcoming missions such as Saturn’s moon to study atmospheric makeup.  On earth, humidity and temperature sounding is conducted near several absorption lines to de ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Internal/External Surface Finishing of Additively Manufactured IN-625 Components

    SBC: Rem Chemicals, Inc.            Topic: Z3

    The objective of this proposal is to develop a surface finishing technology for Inconel 625 Additive Manufactured (AM) workpieces.   The following methodologies will be evaluated and optimized: vibratory finishing, chemical milling and electropolishing.  Once optimized, the project will explore combinations of these aforementioned methodologies in order to identify a surface finishi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Textile Strain Measurement System

    SBC: KATABASIS ENGINEERING LLC            Topic: Z11

    Current evaluations of stress in textile parachute structures rely heavily on analytical estimation without adequate data collection means to validate or improve simulations.  Features of available data acquisition tools are too limited to facilitate “live” stress measurement of parachute textiles in operation.  Advancements in microelectronics and electronics infused "E ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Radiation-Hardened CubeSat Power Management & Distribution (PMAD) for Europa Environment

    SBC: Ragnarok Industries Inc            Topic: S4

    In Phase 1, Ragnarok will mature the much-needed rad-hard BCDR technology from TRL 3 - 4. Phase 2 of Ragnarok’s efforts will proceed to develop the entire functional prototype radiation-hardened PMAD system including the newly developed BCDR hardware from Phase 1. Phase 2 efforts will conclude with a full Critical Design Review (CDR) and a completed and closed list of HRs and HRMPs. The ...

    SBIR Phase I 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government