List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. MULTI-GAS FT-IR ANALYSIS FOR AIR TOXICS

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  2. A NOVEL METHOD FOR SIMULTANEOUS SO2/N2O CONTROL IN COAL COMBUSTION

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Environmental Protection Agency
  3. REMOVAL OF VOLATILE ORGANIC COMPOUNDS FROM GASEOUS EFFLUENT STREAMS BY NOVEL PERFLUOROMEMBRANES

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    VOLATILE ORGANIC COMPOUND (VOC) EFFLUENT STREAMS ARE A SERIOUS AIR POLLUTION PROBLEM. CONTROL TECHNOLOGIES FOR VOCS HAVE BEEN OXIDATION OR CARBON ABSORPTION BUT RECENTLY MEMRANES HAVE SHOWN EFFECTIVENESS. PRESENT MEMBRANE PROCESSES WORK BY PREFERENTIALLY PASSING VOCS (VERSUS AIR) THROUGH THE MEMBRANE AND THEN COMPRESSING AND CONDENSING OUT DOWNSTREAM VOCS. ADVANTAGES OF THIS MEMBRANE PROCESS INCLU ...

    SBIR Phase II 1994 Environmental Protection Agency
  4. A Novel, Nanostructured, Metal-organic Frameworks-Based Product Loss Prevention Technology in the Oil and Natural Gas Sector

    SBC: Framergy, Inc.            Topic: 17NCER2C

    To reach the end user, oil and gas production at the wellhead must be transmitted through the country and distributed to a wide range of customers. This logistical system requires natural gas gathering lines, processing facilities, product storage tanks and lots of other equipment. What results is air pollution caused by industry losses during these operations and the use of continuous or intermit ...

    SBIR Phase I 2018 Environmental Protection Agency
  5. High Mobility Silicon Carbide Substrates

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    THE HIGH TEMPERATURE STRENGTH OF CERAMIC MATERIALS MAKE THEM ATTRACTIVE FOR USE IN HIGH EFFICIENCY COMBUSTION ENGINES. UNFORTUNATELY, THE POOR FRICTION AND WEAR PROPERTIES OF COMMON CERAMICS OFTEN PRECLUDE THEIR USE IN ROTATING AND SLIDING COMPONENTS. SOLID STATE LUBRICANTS ARE A POTENTIAL SOLUTION TO THIS TRIBOLOGICAL PROBLEM BUT THEY ARE USUALLY INCOMPATIBLE WITH OXIDE-BASED CERAMICS. A TITANIUM ...

    SBIR Phase II 1994 Department of DefenseArmy
  6. Metalorganic Enhanced Ion Milling for BaSrTio3

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The demand for higher performance semiconductor devices is pushing the limits of current materials technology. The development of a high dieletric constant capacitor material with 10 - 100 times the charge storage of SiO2 would allow a flat capacitor cell to be used in 256 Mb DRAMs, and simple stacked capacitors to be adopted for 1 and 4 Gb generations. IBM, TI and Micron have entered into an ARPA ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  7. Cost Effective Copper CVD Precursors for ULSI Devices

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Chemical vapor deposition (CVD) of copper for vias and interconnects is critical to manufacture of next generation high speed ULSI devices and has been extensively investigated over the last few years. Although considerable progress has been made commercialization of this technology is currently impossible due to the high cost of the source reagents. In this Phase I program Advanced Technology Mat ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  8. Isolation Techniques for High Temperature Integrated Sensor/Electronics Applications

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Sensors and electronics will become increasingly pervassive as weight, fuel efficiency, cost and emissions requirements put increasing demands on vehicle technology. The development of high temperture, integrated sensors and electronics is necessary to cost-effectively address both civilian and military needs. The arrival of single crystal silicon carbide substrates and high quality epitaxial laye ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  9. Robust Strain Sensor for Engine Monitoring and Control

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    As we approach the 21st century, increases in traffic accidents, the creeping paralysis of traffic congestion, and global environmental pollution have focused attention on reconciling the internal combustion engine (ICE) powered vehicle with the needs of the greater society. The solutions to these complex problems require the proper infrastructure and improved electronics technology to bring the I ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  10. High Temperature Electronics for Vehicle Integration

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    All future combustion and electric powered automobiles will be equipped with sensors directly interfaced with control electronics. The control and power electronics for combustion engines will have to cope with high temperatures and adverse environments. Hybrid and electric vehicles require new device technology to handle the high power in their distribution and control systems. High efficiency, l ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government