Award Data

In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

There is a Department of Defense need for a persistent, mobile power generating capability to service offshore bases and other temporary or mobile installations. In order to facilitate both persistence and mobility, the present concept is of a free floating wind turbine platform, convertible from generating mode to transit mode. Challenges to design of this concept include stability, seakeeping, c ...

Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

Low light level infrared imaging has significant importance in military surveillance and target recognition. The proposed broadband low-light-level nano-BiCMOS camera covers visible and near infrared bands from 400 nm to 1,550 nm wavelengths. With a proven nano-technology, the proposed nano-BiCMOS photo-detector solves this long-standing tradeoff between quantum efficiency and dark current by in- ...

Band XI International, with a very strong background in delivering OSGi Service Oriented Bundle Architecture solutions for embedded military applications will extend those efforts to distribute services across multiple platforms that are connected through mobile ad hoc networks. Beginning with the baseline service oriented applications previously developed for CBRNE sensor synthesis and condition ...

The benefits provided by Belle Aerospace Corporation’s (BAC’s) proposed technology will reduce engine size, weight, acoustic signature, increase reliability and power output, while providing substantial fuel efficiency increases using load following engine control technology and other BAC proprietary innovations. These optimized improvements will provide great reductions in both; the initial l ...

Many DOD systems require high-performance digital signal processing and image processing functions that cannot be implemented efficiently on conventional microprocessors. Systems engineers often address these issues by mapping the compute-intensive portions of these applications onto FPGAs in the form of hardware accelerators, as part of a hardware-software co-design. However, a manual hardware im ...

The research objectives of Aiding Complex Decision-Making Through Augmented Reality (SBIR Phase 1) address real world issues found in complex, high-stress, mobile environments that require rich information in order to reduce error and make informed decisions. Such systems are made up of several interacting components requiring collaborative situational awareness in a dynamic environment. Complexit ...

The primary objective of CU Aerospace’s Phase I work will be to assess the feasibility of producing very narrow linewidth (< 1 MHz), single-mode, diode lasers for pumping alkali atoms. This effort will involve novel laser-amplifier diode architecture to enable such high performance devices. These advances will have a major impact on alkali laser based sensor systems as well as rapidly evolving ...

Multifunctional composite materials would alleviate longstanding problems in composite structures associated with multiple types of damage mechanisms such as mechanical/thermal fatigue, microcracking, and debonding. Self-healing polymers consist of a healing agent that is stored in microcapsules and released whenever cracking occurs in the polymer. The healing agent flows into the cracks and is ...